Hide-A-Hose HS5000 Instrukcja instalacji - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Jednostka sterująca Hide-A-Hose HS5000. Hide-A-Hose HS5000 13 stron.
Również dla Hide-A-Hose HS5000: Instrukcja instalacji (13 strony)
Drukuj stronę
A lubricant has already
been applied to the
o-ring on the pipe fitting.
The pointed tabs are only used
in retrofitting existing homes.
(See Retrofit section)
Insert the valve assembly into
the rough-in frame.
Align the four holes in the
valve assembly with the holes
in the frame. Secure with the
four screws included in the
trim kit.
- 9 -
Trim
Align
to
frame
holes
HS5000 INSTALLATION GUIDE
Using wire nuts, connect
the two leads from the
switch that is mounted on
the outside of the valve to
the low voltage wire.
Pointed
tabs
Switch