Gainsborough K202 Instrukcje użytkowania - Strona 2

Przeglądaj online lub pobierz pdf Instrukcje użytkowania dla Fontanna zewnętrzna Gainsborough K202. Gainsborough K202 5 stron.

Solar 3 Tier Bronze Water Feature

Please read and retain these instructions for future reference

Before using first time

Allow panel to charge for at least 8 hours in full sunlight.

Find an ideal Place for the Solar Light.

Place the solar panel in an area where it will receive direct sunlight for at least 8 hours per day. The number

of hours the pump will work is directly proportional to the hours of sunlight it receives. If the panel is placed

in a shaded area, it will not be able to fully charge and its pumping time will be limited.

Assembly

1. Place the fountain

base on a smooth level

surface. Attach the post

connector to the

fountain base. Screw the

post into the post

connector by twisting it

clockwise with the

threads. Ensure that both

the post and the post

connector are snug.

3. Insert the pump housing pipe into the hole on top of

the pump. Rotate the nut and washer on the pipe until

they are tight at the top of the pump housing. Ensure that

the rectangular guide is flush with the raised areas. The

bottom of the pump should be flat against the base of the

pump housing.

Instructions for Use

K202

2. Fit the pump (attached

to the fountain basin)

into the pump housing

on the side with the gap.

(Note: The pump cord

fits into the gap).

v001: 13/08/21