AutomationDirect T1F-08DA-2 Podręcznik - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik dla Systemy wejścia/wyjścia AutomationDirect T1F-08DA-2. AutomationDirect T1F-08DA-2 6 stron. Analog voltage output module
Drukuj stronę1 - 8 0 0 - 6 3 3 - 0 4 0 5
I/O Module Installation
I/O module installation
Terminator I/O modules feature separate
terminal bases for easy installation.
To install I/O modules:
1. Slide the module into its terminal base (until it
clicks into position)
2. Hook upper DIN rail tabs over the top of DIN
rail, and press the assembly firmly onto the
DIN rail.
3. Slide the module along the DIN rail until it
engages with the adjacent module.
Removing I/O modules
is a snap
Grip the locking handle, as shown, and pull gently to eject
the I/O module from its base. The module will slide out for
easy replacement. This procedure does not apply to network
interface modules or power supplies, which have integral
bases.
w w w . a u t o m a t i o n d i r e c t . c o m
1
2
For the latest prices, please check AutomationDirect.com.
DN-ASB-1
angled mounting
bracket
Great for mounting
in upper locations
Great for mounting
in lower locations
Optional angled support bracket raises
and tilts the mounting rail for easier
access and wiring. Use with 35mm DIN
rail. See the Connection Systems in this
catalog for details.
3
Hot-swappable
I/O modules
You can remove I/O modules
under
power,
cise
caution while doing
so. Do not touch the termi-
nals with your hands or
any
conductive
Always remove power when
possible.
Universal Field I/O
but
exer-
material.
tFED-54