Dynamax AVRD 3.2 Instrukcja instalacji i obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Kontroler Dynamax AVRD 3.2. Dynamax AVRD 3.2 12 stron. Voltage regulator

4. Use wire with gage 16AWG or higher on the input to handle the higher current

requirements

5. +ve and –ve from the battery or any power source at the input must be wired with correct

polarity. +ve from battery connected to Vin and –ve from battery connected to the Gnd

terminal next to the Vin terminal.

MAINTENANCE

1. No regular maintenance is required. The regulators are sturdy devices, and give years of

trouble-free performance.

2. In case external fuse blows out due to over current or terminal short circuit replace the

fuse with same rating.

3. If the AVRD shuts down due to over current latch restart the AVRD by turning the slide-

switch OFF and ON.

5.0 Warranty

In an effort to provide at most reliability of products in field applications all Dynamax

products are tested for trouble free operation in the field. AVRD along with all components

are warranted to be free from defects for one year after the purchase.