Hideaway Beds Beta Bed Double Instrukcja montażu - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz Hideaway Beds Beta Bed Double. Hideaway Beds Beta Bed Double 20 stron. Wallbed frame and cabinet system

Drukuj stronę
Familiarize yourself with all of the components in the Beta-DIY System, as
well as thoroughly study this manual so you may plan the steps required to
complete the project.
Study all illustrations and plan drawings. Make sure that the space available is
adequate for the specified dimensions of the bed cabinet, both in the open
and closed positions (see cut list pages 5-6 to cross check dimensions).
Panels should be 3/4" (19mm) ply core. Particle board is acceptable but with
more attention given to assembly procedures and handling. This is discussed
further in this manual.
Pull handles to open the bed down are not provided. Select these from your
local decorative hardware supplier. Have them on site at the time of assembly.
Check to be sure that all items are available
Beta D.I.Y. Hardware System
Cabinet Components and Hardware
Necessary Tools
If you choose a horizontal bed orientation, a separate cut list is provided and
assembly diagrams are on page 20.
1.
Prepare all wood cabinet components.
2.
Mount Lift Mechanism.
3.
Install springs in Lift Mechanisms.
4.
Assemble the Bed Cabinet.
5.
Attach Bed Cabinet to wall.
6.
Assemble Bed Face Panel Unit.
Prepare and assemble Cleats and Rails to Bed Face.
7.
Install the Bed Face Panel in Cabinet
8.
Install Handles - Leg Assembly - Mechanism Covers - Mattress

Project Start Up

Steps to Complete Project
2.