Hideaway Beds Next Bed Single Instrukcja montażu

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz Hideaway Beds Next Bed Single. Hideaway Beds Next Bed Single 7 stron.

Drukuj stronę

ASSEMBLY INSTRUCTIONS

publication may be reproduced or transmitted without

permission of the Copyright owner.

Patents Pending.

Diagram 1.

PULL TO OPEN

Bed Open Label

Section 1: LAY OUT PARTS

Unpack and familiarize yourself with the components.

Single, Double and King size Next Beds™ are packed in 3

boxes (Single 2 boxes). Remove the entire contents of

boxes and lay the components out on the floor in the

manner of Diagram 1. Double check the cartons to be sure

you have not missed any parts left in the packing materials.

The Hardware is organized in the card step by step for

convenience.

Do not remove hardware or Slat Holders until directed.

COMPONENT LIST

SINGLE

DOUBLE

KING

Slat Holder Bag

Mattress Size

(900x1900mm)

-35"x75"

(970x1900mm)

- 38"x75"

(1370x1900mm)

- 54"x75"

(1500x2000mm)

- 60"x80"

A. Mattress Retainer Bar

- Single Bed (1)

- Double & King Bed (2)

B. Head Frame (1)

C. Center Rail (Double & King Bed)

D. Side Rail (Pair)

E. Leg Actuator Bars (2)

F. End Frame (1)

G. Wall Mount Bracket (2)

H. Floor Yokes (Pair)

I. Yoke Connector Bar (1)

J. Bottom Spring Tube (1)

K. Springs (6-Single, 8-Double and 10-Queen)

L. Spring Cover (2)

M. Leg Connector Tube (1)

N. Legs (Pair)

Slat Holder

(3-Single, 6-Double or King)

Opened Slat Holder

(3-Single, 6-Double or King)

Self Tapping Screw

(6-single, 12-Double or King)

P. Hardware Card NB#1 (1)

Hardware Card NB#2 (1, Double or King)

(coordinates with step numbers)

Q.Slats (13-Single, 26-Double, 28-King)

Updated130717MWBS