Hideawaybeds alpha bed SBF Instrukcja montażu - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz Hideawaybeds alpha bed SBF. Hideawaybeds alpha bed SBF 18 stron. Steel bed frame

Drukuj stronę

STEP 2: Install the springs on the Lift Mechanisms

SPRING APPLICATION CHART

Please Note: These are recommendations only. Actual number of springs required will depend

on the total weight of the bed-face unit including the mattress and all bedding.

BED SIZE

Single

Double

King

After you have completed installing and checking the operation of your bed, you

may find it necessary to add or remove springs to achieve the correct lift effort of

between 5 to 10 pounds.

There are nine locations for springs. If the bed requires an even number of

springs, do not use the center hole (#5 from the top). If the bed requires and odd

number of springs, start with the center hole (#5 from the top) and work outward in

both directions evenly.

Hook the springs so the open ends are facing outward. You may have to gently

pry up the tension arm and slide the spring under and snap them into place in the

proper hole, matching the same numbered hole from the top of the mechanism

back plate. You should have an equal number of springs on each side of the

center hole.

Use the same number of springs and the same layout on both the left and right

mechanisms.

Spring Hole #1

Upturned Edge

of Mounting Plate

Center line

Spring Hole #9

BED PANEL MATERIAL

Plywood Core

2-3 springs per side

4-6 springs per side

5-6 springs per side

Drawing 5.

Particle Board

3-4 springs per side

5-6 springs per side

6-7 springs per side

Tension Arm

Arm Bracket