DynaMetric TMP-636 Podręcznik

Przeglądaj online lub pobierz pdf Podręcznik dla Adapter DynaMetric TMP-636. DynaMetric TMP-636 4 stron. Telephone transmit & receive patch for use with sound card or tape recorder
Również dla DynaMetric TMP-636: Instrukcje (3 strony)

Drukuj stronę

DynaMetric

The TMP-636 Computer/Telephone Audio Adapter adapts most single or multiline

phones, analog or digital, to your computer sound card. It provides a clear audio signal,

containing both sides of the phone conversation, to your computer. When used with

WebEx web conferencing software, it allows you to record the telephone and computer

audio portion of your WebEx conferences synchronized with the web portion. It also

allows playback of the recording over the telephone.

The TMP-636 connects quickly and easily, with no special tools, to the telephone via the

modular handset connector. See the diagrams and installation instructions below.

The operation of the TMP-636 is completely automatic. Simply install it according to the

instructions below and operate your sound card controls as usual.

To Install: (See diagram)

Unplug headset (or handset) coil cord from the base of the telephone, and plug the

short modular cord from TMP-636 in its place.

Plug the headset coil cord into the modular jack on the TMP-636.

Insert the long BLACK cord into the speaker or headphone jack on the sound card.

Plug the long GREY cord into the MIC jack on the sound card.

That's it! See below for software setup.

FOR LEGAL USE ONLY

www.DynaMetric.com

717 SOUTH MYRTLE AVENUE • MONROVIA, CALIFORNIA 91016-3422

626-358-2559 • FAX 626-359-5701 • 800-525-6925

TMP-636

Computer/Telephone Audio Adapter

P/N 44150

Page 1 of 4

11/01