Hides HV-310 Instrukcja szybkiej instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Nadajnik Hides HV-310. Hides HV-310 12 stron. Dvb-t ham tv transmitter box

Plug in the micro SD card.

Power on the receiver box and wait for about 60 seconds.

If the SD card is detected properly and JEDI.IMG is found, the update progress will be started.

The 7-SEG LED shows "88" when updating, and show 21 when update is done.

If you can connect to the UART debug port (refer to next chapter), you will see the debug messages,

"sd upgrade start" and "sd upgrade finish"

Remove the micro SD card, power off, then power on the receiver box.

Note:

1. Jedi.img will be rename to jedi_tmp.img when update is done.

WWW.HIDES.COM.TW

Easy HD Expressway!

screws

1 0