Hides DC-105 Instrukcja szybkiej instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Kamera bezpieczeństwa Hides DC-105. Hides DC-105 19 stron.

It will take about 20~30 seconds for DC-105 to boot.

When the boot process is completed, it begins to transmit the camera video from the yellow BNC

connector in DVB-T, and the CVBS output (thru the black BNC) is also present.

A yellow LED will be on when transmitter is on.

Note:

1. Default RF channel is CH21, Frequency: 474MHz, BW:8 MHz, unless specified.

2. When initialization done, "###Camera Boot Finished###" message will be shown in the UART

debug port output; refer to more details below.

Connect to a DVB-T receiver

Power LED

(red)

Transmitter

LED (yellow)

DVB-T

RF output

(Connected to

receiver)

1. Connect the video RF output to a coaxial cable (or an antenna). A DVB-T receiver can be

either DVB-T TV, DVB-T STB or DVB-T USB receiver dongle.

2. The video output is full HD 1920x1080x30P H.264 format. Please make sure your receiver is

capable of HD decoding. (Many old DVB-T STB's or TV's can only decode 720x576 SD).

Default RF channel is CH21, Frequency:474MHz, BW:8 MHz, unless specified.

By default the focus of the lens may not be correct. Please turn the lens clockwise or

WWW.HIDES.COM.TW

Easy HD Expressway!