Dynamic DT1100-DEC Instrukcja obsługi

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt do zwalczania owadów Dynamic DT1100-DEC. Dynamic DT1100-DEC 2 stron. Insect trap

Drukuj stronę

MODEL: DTl 100-DEC

OWNER'S MANUAL

Thank you for purchasing this

DYNATRAP® Insect Trap!

c:3

This product moy be covered by one or more

U.S.

patents

or pending potent applications. See www.dynotrop.com/potents

)i)i)i)i

ALL-WEATHER CONSTRUCTION

INDOOR/OUTDOOR • RAIN OR SHINE

IMPORTANT SAFETY INSTRUCTIONS

WARNING, When using electric appliances, basic precautions should always be followed, including the

following:

- To

disconnect, turn all controls to the off ("0") position, then remove plug from outlet.

- Unplug from outlet when not in use and before servicing or cleaning.

- To

reduce the risk of electrical shock, do not put appliance in water or other liquid.

- This appliance is provided with double insulation. Use only identical replacement

parts.

See instructions for Servicing of Double-Insulated Appliances.

INSTRUCTIONS FOR DOUBLE-INSULATED, CORD-CONNECTED APPLIANCES:

In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided

on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing of a double-insulated

appliance requires extreme care and knowledge of the system, and should be done only by qualified service personnel.

Replacement parts for a double-insulated appliance must be identical to those parts in the appliance.

IMPORTANT SAFETY INSTRUCTIONS

Please read these instructions before using the DynaTrap®lnsect Trap and keep for future reference.

1. Always turn unit off and disconnect plug before servicing, cleaning, or changing bulb.

2. Do not position the unit near heat, gas, oil or other flammable materials.

3. Mount product out of reach from children.

4. Never operate this product ii it has a damaged cord or plug, ii it is not working properly, ii it has been dropped or

damaged, or ii it has been dropped into water.

5. This product is equipped with 2-conductor cord and 2-prong polarized plug as a safety feature. This plug will lit in

polarized oudet only one way. If the plug does not fully lit in the outlet, then reverse the plug. If it still does not lit,

then contact

qualified

electrician.

To reduce the risk of electrical shock, only plug into a properly installed outlet.

Do not attempt to defeat this safety feature.

6. Do not insert lingers or any foreign objects into the unit while it is connected to an electrical outlet.

7. Collected insects within the unit may contribute to lire, so clean insects from the unit frequently.

8. Do not clean this product with water

spray.

Do not place where it

can

fall into water, or near flammable materials.

9. Do not touch Ian while in motion.

10. Do not abuse cord-never carry or hong unit by cord or yank ii to disconnect from receptacle. Keep cord away from heat,

oil, or sharp edges.

11. Use only extension cords that ore clearly marked "Suitable for Use with Outdoor Appliances" ond that have plug and

receptacles that match the product plug. Replace oll damaged

cords.

INSTALLATION & OPERATING INSTRUCTIONS

1. Unpack unit. Save carton for off-season storage (if needed).

2. If hanging or mounting the unit, place approximately 3-6 feet above the floor/ground level for optimal catch rate and

easy access for cleaning.

3. If mounting the unit to a wall, install the mounting bracket to the side of the DTl

100.

This bracket slides into side wall

of the DTll

00.

4. Turn power switch to "ON" position (The power switch is located under the rain protector)

5. Plug cord into an outdoor outlet or UL listed extension cord as described in "IMPORTANT SAFEIY

INSTRUCTIONS".

6. For best catch results leave unit on at all times, except when cleaning or servicing.

7. It is recommended to place the unit 20-40 feet away from where people will be sitting.

8. Catch rate activity will be higher at night. For best catch results

is recommended to keep the unit away from competing

light sources. Intended for household use

only.

CLEANING

Clean the trap at least once a week to prolong life of the unit, insure lire prevention, and provide for more efficient

operation.

1. Be sure to clean the unit once per week

2. Switch the unit off and unplug before cleaning

3. For weekly cleaning,

twist

the cage

clockwise.

Remove the damper by grasping the crossbar near the edge of the

damper.

Pull up

firmly.

Remove ony buildup from the inside of the retaining coge and Ian with o brush

(included).

Replace damper,

snap firmly into

place.

4. For mojor cleaning, remove the screws securing the Ian housing to the light housing. After removing the screws,

gently pull the Ian housing away from the light

housing.

Using a salt brush, remove dirt and debris from the light

housing.

Once the cleaning process has been completed, align the screw holes in the Ian housing with the screw holes in the

lighting unit and tighten the screws to the base of the lighting

unit.

IMPORTANT: When replacing the retaining cage - DO NOT press/ push against the screen

windows.

REPLACING BULB

The Light bulb life expectancy is approximately 3,000 hours (or about 4 months), and should be replaced regularly to ensure

optimal UV effectiveness. Even though the bulb's light may be visible to you, its ability to attract insects diminishes over

time.

Turn power switch to "off"

position.

UNPLUG UNIT, and allow bulb to cool before

replacing.

Remove the screw securing the cover (A) and then twist cover counter-clockwise

(B).

cover

lxick

expose

bull.

Note: Upper

cnl

kiwer

sections

wil remain mooec1ed by eledriml

wre -

Not Pull

Attempt To Disconnect.

(C) Cover the bulb with a cloth to protect your linger and hand. Grasp the bulb (with your hand and lingers protected by the

cloth) and gendy pull the bulb from the socket.

4. Remove any debris from the lamp socket with a brush before inserting the new bulb.

5. Replace cover onto grill and twist

clockwise

to lock, replace screw (A) and tighten to secure.

6. Replacement fluorescent bulbs can be found at your local retailer or can be ordered directly from Dyna Trap by calling

1-877-403-TRAP (8727) or visiting

www.dynatrap.com.

HOW THE DYNATRAP® INSEO TRAP WORKS

Flying insects are attracted to the unit by the UV light and CO2

that is generated by the photo-catalysis between the UV

lamps and the special TI02 coating. The Ian then pulls the

insects into the screened base, trapping them until they

dehydrate and die. The base can be removed, allowing the

contents to be periodically emptied into the trash. The

see-through screen shows the insects trapped in the

compartment, alerting you when the

cage

needs to be

emptied.

BULB

.;;;;;;~

~!11::b

;;::;.--

TI02

----,,,,:1+-F=

COATED

RETAINING

CAGE

"t-1"-t----

SURFACE

WALL

MOUNT

AUTOMATIC

DAMPER

TROUBLESHOOTING

Problem:

Possible cause:

Correction:

Bulbs do not illuminate

No electrical power

Check plug and receptacle and fuse or circuit breaker.

and Ian does not

spin.

Check to make sure power is switched to the "ON"

position.

Bulb illuminates, but fon

Shorted Ian

1. UNPLUG

UNIT:

Examine Ian to see that ii is free from

does not

spin.

foreign material, dirt or build-up of dead insects. Clean unit as

in "CLEANING" section.

Fan spins, but bulb does

Bulb not seated

Check all sockets for proper bulb sealing and alignment.

not illuminate

properly

Replace bulb ii needed following instructions under

Burnt out bulb

"Replacing Bulbs".

LIMITED WARRANTY

DYNAMIC warranties to the original purchaser that this product is free from defective materials and

workmanship. This warranty is limited to remedy any defective part for a period of one year from date of

original date of purchase. Retain your original receipt as proof of purchase. This warranty does not apply

to the light bulb, nor to, in our judgment, misuse or abuse. If

this

unit has been altered, no warranty is in

force. This warranty does not apply if this unit is purchased outside the United States, Canada and Mexico.

In no case shall DYNAMIC be liable for any accidental, punitive, consequential, or any other damages of

any kind for breach of this or any other warranty, expressed or implied, whatsoever. Some states do

not allow limitation on how long an implied warranty lasts, so the above limitation or exclusion may not

apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary

from state to state.

PARTS & ACCESSORIES AVAILABLE

PART

DESCRIPTION

410SO

7-Watt Replacement Fluorescent Bulb

piece)

see all replacement and accessory parts available for your Dyna Trap,

including UV-bulbs, fans, retaining cages, and more, visit

www.dynatrap.com.

l ~

\\IC.

Dynamic Solutions Worldwide, LLC

12247 W. Fairview Ave. Milwaukee, WI 53226

Phone: 414-431-2819

Toll

free:

1-877-403-TRAP (8727)

Toll free

lax:

877-403-3293

Email: [email protected]

Visit us online at www.dynatrap.com

Dynamic Solutions Worldwide,

LLC

24/7

' I /

-0.-

/1'

~~~~~~~~

SAVE THESE INSTRUCTIONS

c@~

lntertek