DB Research DB Drive WDX Mini 1000.1 Podręcznik użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz DB Research DB Drive WDX Mini 1000.1. DB Research DB Drive WDX Mini 1000.1 12 stron.
Drukuj stronęC) REM ( REMOTE CONNECTION )
Run a remote turn on cable from the head units remote switched + 12V output.
WDX +12V, GROUND, REMOTE CONNECTION DIAGRAM.
SPEAKER CONNECTION
DB Drive recommends to use a minimum of 12 gauge speaker connecting cables. Run 12 gauge
speaker connecting cables from your speakers to WDX amplifier's mounting location. Keep
speaker cables away from power cables and WDX amplifier's input cables. Use grommets
anywhere the cables have to pass through the holes in the metal frame or sheet metal. Connect to the
speakers according to the type of the terminals on each speaker. Strip 3/8" of insulation from the
end of each cable and twist the cables strands together tightly. Make sure there are no stray
strands that might touch other cables or terminals causing a short. Crimp spade lugs over the
cable ends or tin the ends with solder to provide a secure termination. Connect the cable ends to
WDX amplifiers as shown on speaker system diagrams.
WDX MONOBLOCK AMPLIFIERS' SPEAKER CONNECTION DIAGRAM 1.
Ground
12V
BATTERY
8~ 1 ohms
7