Gait up PhysiGait Lab Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przyrządy pomiarowe Gait up PhysiGait Lab. Gait up PhysiGait Lab 18 stron. User manual and outcome parameters

Drukuj stronę

applications. For gait measurements the configuration must be set to the values indicated

below, otherwise the software cannot analyse the data.

Sensor

Accelerometer

Gyroscope

Barometer

The two sensors must also be synchronised together, therefore one of the sensors should

store an empty text file called "slave.txt" which indicates that it is the "slave" sensor, the

second sensor does not have such a file and is thus the "master" sensor. The correct

configuration is pre-installed when you order a PhysiGait Lab, so you don't need to modify

the configuration of the Physilog®5.

5.3

How to update the software on USB key

The software on the USB key can be updated to the latest version using the "Gait Analyser

Updater" which can be downloaded for free from www.gaitup.com/support. Install the

updater software on your computer, start the updater software and plug your USB key with

PhysiGait Lab software. By following the instructions provided by the software, your USB

key will automatically be updated with the latest software version. The computer needs to

be connected to the internet to download the new version. Free updates are included in the

first year after purchase, for later updates an extension can be purchased. If the update

doesn't work, please contact Gait Up's customer service (via contact form on

www.gaitup.com/support or via email: [email protected]).

5.4

Handling / Maintenance

Physilog®5 should be handled carefully. In particular, it should not receive shocks, such as

fall, crushing, being hit etc. Do not press forcefully on the on/off button, this can damage the

button.

Warning: Do not use or charge the Physilog® if the sensor or its case is

damaged. Contact Gait Up about what further action is needed when the case

is damaged. In case the battery is damaged immediately move the device

away from flammable materials and contact Gait Up's customer support.



Sensors can be placed on the foot in any orientation, it will not influence gait

measurements



To benefit from the maximal battery life, fully charge Physilog® sensors before doing

measurements (LED shines green when connected to computer or charger, you can also

check the battery level with the Physilog®5 companion Android Application available on

PhysiGait Lab user manual v1.3.1 Date: 29.04.2019

Sampling rate

128Hz

0-64Hz (any sampling rate)

EPFL Innovation Park, Bat C. CH-1015 Lausanne

Sensor range

+/-4 g or +/- 8 g

+/- 1000 deg/s

Gait Up SA

www.gaitup.com

TVA CHE-145.136.760