Gait up Physilog 6S Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria Gait up Physilog 6S. Gait up Physilog 6S 18 stron.
Również dla Gait up Physilog 6S: Skrócona instrukcja obsługi (6 strony)

Drukuj stronę

3.2. Control the Physilog from a mobile application

The Gait Up companion mobile applications allow to control the Physilog 6S sensor. Two modes

are available in the application, for details refer to the user manual of the mobile application.

There is no need to pair your Physilog® with the tablet prior to Bluetooth communication, just

select the Physilog® from the list in the app.

Troubleshoot: If a sensor is not detected by the tablet, gently shake the sensor to enter

detection mode. If the sensor can still not be connected, check that it has enough battery and is

not connected to another mobile device and if necessary ultimately do a reset of the sensor as

explained in section 5.7 Troubleshoot.

Note: B luetooth 4.0 or higher is required on the mobile device to be able to communicate with

Physilog 6S.

4. Data Analysis

Physilog® always saves raw data on its internal memory, except when streaming the data live via

Bluetooth using the "IMU stream" functionality of the app. Users have access to the raw data

through companion software called Research ToolKit (RTK). The RTK is available for computers

(PC and Mac). Functions to read raw data inside MATLAB® are also available. Please refer to the

RTK user manual for more details.

USB data transfer

Data saved on the internal memory of the Physilog® can be accessed using USB data transfer.

Therefore, plug the USB cable to the Physilog® and a computer. The Physilog 6S connects to the

computer like a USB key and files can be accessed. One file for each measurement is created and

files are stored in folders depending on creation date (YY_MM_DD). The file name is composed of

a file number (increasing from 1 to 99), the body location (as defined in the configuration, f.ex.

'LF') and the sensor serial number unique part (4 digits). Copy-paste the files to your computer

for analysis. From here you can also rename folders and files or delete the files from Physilog®'s

memory.

Warning: Do not remove the conf.bin file which contains the configuration information,

otherwise the Physilog® will return to a default configuration. If this happens, update the

configuration using the Research ToolKit or contact Gait Up support.

5. Practical Considerations

5.1. Fixation

The Physilog 6S comes with two fixation clips as default attachment accessory, one for the belt

and one for the shoe laces. Additional clips and elastic straps with Velcro patches to stick onto

the Physilog® can be purchased from Gait Up.

Physilog 6S user manual v1.0.0 Date: 08.01.2021