Celestron 71237 Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Lornetka Celestron 71237. Celestron 71237 16 stron. Solar binocular
Sol a r Bi n o cu lars
SET-UP AND USE OF YOUR CELESTRON ECLIPSMART BINOCULAR
Because of its built-in solar filters, nothing less bright than the sun as seen from Earth
should be able to be seen through an EclipSmart binocular. If you can see anything
other than the Sun through these binoculars, do not attempt solar viewing with them
and contact Celestron's customer service department.
SET-UP
1. Adjusting the Interpupillary Distance (IPD)
Since the distance between the eyes (specifically,
the distance between the centers of the pupils)
varies among individuals, the two eyepieces of the
binoculars must be correctly aligned (adjusted).
This is called adjusting the interpupillary distance.
To adjust this distance, lift the binoculars up to your
eyes (using both hands) and move the two halves
of the binoculars by flexing the hinge until both eyes
seem to be fully covered by the eyepieces.
ENGLISH |
3