Gait up Gait Up Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Fitness Trackery Gait up Gait Up. Gait up Gait Up 17 stron.

Gait Up SA

EPFL Innovation Park, Bat C. CH-1015 Lausanne

www.gaitup.com

TVA CHE-145.136.760

3. How to do a measurement with Physilog

WARNING: During automatic analysis, every step is analysed. For example, if you did

a part of walking during a running measure and you include this part in the analysis

the results could be biased. If the subject stopped in the middle of a walking

recording, there will be a cycle with cycle duration including the stop duration.

WARNING: If the sensor is not correctly attached the data analysis could fail or be

less precise than expected.

WARNING: Before starting a measurement, please carefully read part 2.

To obtain an analysable file, you have to do a measurement with Physilog

5. You can obtain

this file by starting the sensors using their button or using a companion application (f.ex. on

a smartwatch). For each method your measurement files (.BIN) are saved in the sensor

memory (8Go). A file contains the raw sensor data. Below you can check the name

description:

To start the measure directly on the Physilog

5, hold the button for 3 seconds on each

sensor. Check that there is a green blinking on your two sensors after releasing the button.

WARNING: If you want a synchronization between your two sensors make sure they

are blinking green at the same time. Otherwise you need to check the configuration

"Radio mode" and "Radio channel" of your sensors with the Research Toolkit, tab

"Configuration".

Once the Physilog

5 have started recording and are blinking green, the subject can perform

the gait or running protocol.

To stop the measure hold the button for 3 seconds, the sensor shines orange, then blinks

rapidly 3 times and stops. Check that the sensors stopped blinking. The file is automatically

saved on the device.

The Physilog

5 sensors can be remotely controlled by a companion application installed on

a smartwatch or mobile phone. For explanations regarding the companion applications,

please refer to the corresponding user manual.

User guide GaitUp Lab - v1.0.0 Date: 04.05.2020