dB Technologies VIO L210 Skrócona instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla System głośników dB Technologies VIO L210. dB Technologies VIO L210 8 stron.
Drukuj stronęTechnical Data
Speaker
Type:
2-way professional active line-array
element
Acoustical data
Usable Bandwidth [-6
dB]:
Frequency Response
[±3dB]:
Max SPL (1
m):
134
-
136 dB (dependent on
frequency/preset)
HF compression
driver:
1.4" Exit, Neodymium
HF voice
coil:
3", Titanium
Waveguide
HF:
yes
LF: (2x)
10", Neodymium
LF Voice
Coil:
2.5"
LF Phase
plug:
Aluminum phase corrector
Crossover
frequencies:
950 Hz
FIR filters:
yes
Horizontal dispersion ([-6dB] 500 – 18100
Vertical
dispersion:
varies on number of modules and
configurations
Amplifier
Amp
Technology:
Digipro® G3 - Autorange
Amp
Class:
Class-D
RMS
Power:
900 W
Peak Power:
1800 W
Cooling:
Passive (convection)
Download the complete user manual on:
www.dbtechnologies.com/EN/Downloads.aspx
EMI CLASSIFICATION
According to the standards EN 55103 this equipment is designed and suitable to operate in E3 (or lower E2, E1) Electromagnetic environments.
FCC CLASS B STATEMENT ACCORDING TO TITLE 47, PART 15, SUBPART B, §15.105
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
WARNING: Make sure that the loudspeaker is securely installed in a stable position to avoid any injuries or damages to persons or properties.
For safety reasons do not place one loudspeaker on top of another without proper fastening systems. Before hanging the loudspeaker check
all the components for damages, deformations, missing or damaged parts that may compromise safety during installation. If you use the
loudspeakers outdoor avoid spots exposed to bad weather conditions.
Contact dB Technologies for accessories to be used with speakers. dBTechnologies will not accept any responsibility for damages caused by
inappropriate accessories or additional devices.
Features, specification and appearance of products are subject to change without notice.
dBTechnologies reserves the right to make changes or improvements in design or manufacturing without assuming any obligation to change
or improve products previously manufactured.
VIO L210
www.dbtechnologies.com
67 – 20000 Hz
78 – 18100 Hz
Hz):
100°
Scan with your QR Reader
App to download the
complete User Manual
Processor
Controller:
DSP, 28/56 bit 48 kHz
Limiter:
Dual Active Peak, RMS, Thermal
Controls:
Audio attenuation, DSP presets
Advanced DSP
function:
Linear Phase FIR filters
Rotary
presets: 2
Rotary BCD 8 positions for line-array
configuration (Speaker Coupling, High Frequency
Compensation)
Input / Output
Mains
connections:
PowerCON
Power consumption:
1.6 A (220-240 V) / 2.8 A (100-120 V)
Maximum number of power linked elements:
VIO L210 (220-240 V), up to 7 VIO L210 (100-120 V)
Signal
Input:
(Balanced) 1x XLR IN
Signal
Out:
(Balanced) 1 x XLR link OUT
RDNET connectors:
Data In
USB
connector:
mini USB B-type (for SERVICE DATA)
Mechanics
Housing:
Wooden box – Black polyurea finished
Grille:
CNC machined full metal grille
Rigging
points:
3 (Easy Rigging)
Handles:
2 for each side
Width:
720 mm (28.35 in)
Height:
320 mm (12.60 in)
Depth:
520 mm (20.47 in)
Weight:
28.6 kg (63 lbs.)
®
TRUE1 In / Link
up to 10
/
Data Out
Rev 1.0 cod. 420120248Q