Celestron StarSense AutoAlign Podręcznik - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik dla Aparat cyfrowy Celestron StarSense AutoAlign. Celestron StarSense AutoAlign 15 stron.
Drukuj stronę
SYSTEM REQUIREMENTS
When setting up StarSense for the first time, a
wide-angle/low power eyepiece and high power
eyepiece are recommended . Start with the
wide-angle/low power eyepiece .
TELESCOPE COMPATIBILITY
COMPATIBLE
NexStar SE Series
CPC, CPC DX
NexStar GT (with Aux . splitter)
CGE Pro
Advanced VX Series
CG-5 Computerized (with Aux . splitter)
CGEM, CGEM DX
CGE
NexStar SLT
LCM (with Aux . splitter)
Mounts with only one port for the hand control, such as the CG-5 Computerized Mount, require an Auxiliary
Port Splitter, item #93919, available from Celestron .
6
I
StarSense AutoAlign works with most computerized
Celestron telescopes and several different optical
tubes . Refer to the compatibility charts below .
NOT COMPATIBLE
NexStar i Series
Ultima 2000
Early generation GoTo mounts (such as Compustar)
NexStar GPS
OPTICAL TUBE COMPATIBILITY
The StarSense camera replaces the finderscope on your telescope . Use one of the two included camera
brackets to attach the camera, the large bracket (already installed), or the small bracket . Refer to the chart
below to determine which bracket fits your optical tube .
LARGE BRACKET
SMALL BRACKET
All Celestron Schmidt-Cassegrains
Celestron 6" f/8 .3 Refractor
All Celestron EdgeHDs
NexStar 102SLT Refractor
NexStar 4SE Maksutov-Cassegrain
NexStar 127SLT Maksutov-Cassegrain
NexStar 130SLT Reflector
All Celestron Reflectors and Refractors Packaged with the
Advanced VX Mount
All Celestron Reflectors and Refractors Packaged with the
Advanced CG-5 Mount
All NexStar GT optical tube assemblies
Several other optical tubes from other manufacturers which use
a similar finder dovetail base .
Large Bracket
Small Camera Bracket
(pre-installed on camera in box)
I
7