Celestron VistaPix 72210 Podręcznik użytkownika - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Aparat cyfrowy Celestron VistaPix 72210. Celestron VistaPix 72210 10 stron. 8x32 binocular & digital camera
Drukuj stronę
5. How to use the binocular
To adjust the eye-relief for eyeglass wearers: Fold down the rubber eyecups
and place them against your glasses to get the best viewing result.
Adjusting the eyepieces
The distance between your eyes is called interpupillary distance.
The interpupillary distance is different from one person to another.
It is important to adjust to your interpupillary distance before usingyour
VistaPix:
- Hold the VistaPix firmly in the normal viewing position.
- Adjust the barrels by pushing together or pulling apart until you see a single
circle field with both of your eyes.
Focusing the Binocular
A. Set the Diopter Knob on underside of VistaPix at its center point between
+ and - .
B. Choose an object that is at least 15 meters (49.21 ft) away .
C. Looking with just your left eye, rotate the Center Focus Knob until the object
you are viewing is in best focus.
D. Looking with just your right eye, rotate the Diopter Knob until the object you are
viewing is in best focus.
E. Viewing your object with both eyes, turn the Center Focus Knob to bring it in
best focus.
P .7
6.Using the Camera
Use this product under good lighting conditions, avoid facing light source
directly. Remember to keep a distance of at least 49 feet (15 meters) away
from the target when taking a photo. As you press the "Shutter/Set" button,
hold the binocular very steady until you hear a "Beep" sound. If the binocular
is unsteady, the camera will not focus well and blurred images will result.
Photographic functions
6-1-1. Turn on Power by pressing the Mode/ Power Button (4) for 3 seconds.
6-1-2. Press the Mode/ Power Button (4) to select the resolution mode ("Hi" or"Lo").
6-1-3. Select a target to view with the binocular, and aim at the target.
6-1-4. Press the Shutter/Set Button (5) to take an image. A short beep will
sound indicating the picture has been taken.
6-1-5. The digital counter on the LCD will advance each time an image is taken.
When the camera's memory is full, the screen will display Full.
6-1-6. To erase the last image taken, use the Mode/Power Button (4)to select
the "erase last image" mode (trash can icon), and press theShutter/Set
Button for 3 seconds.
6-1-7. The self timer function can be selected from the LCD by using the
Mode/Power Button (4). Press the Shutter/Set Button (5) to take an
image after 10 seconds.
6-1-8. VistaPix is a Mass Storage Device. This means that while
connected to a PC through the USB port, Windows will add a "Removable
hard drive under the "My Computer" icon. Simply access the removable
disk to Disk" toretrieve,view and save images to a permanent location.
When connected to a PC, the LCD screen will display the [PC] screen.
6-1-9. If at any time VistaPix can not access the optional SD memory card, the
"FMT" icon will flash. To correct this the SD card may need to be
Formatted. To format the SD card, select "SD card format mode" and
Press the Shutter/Set Button for 3 Seconds.NOTE:This will erase
all images stored on the memory card.
P.8