CELETTE EASY DENT 3000 Oryginalny podręcznik - Strona 7
Przeglądaj online lub pobierz pdf Oryginalny podręcznik dla System spawania CELETTE EASY DENT 3000. CELETTE EASY DENT 3000 14 stron.
Drukuj stronę
Use only genuine replacement parts from the manufacturer.
Perform installation, maintenance, and service according to the Owner's Manuals, industry
standards, and national, state, and local codes.
FLYING METAL OR DIRT CAN INJURE EYES:
Wear approved safety glasses with side shields or wear face shield.
ELECTRIC AND MAGNETIC FIELDS (EMF) CAN AFFECT IMPLANTED MEDICAL DEVICES:
Wearers of Pacemakers and other Implanted Medical Devices should keep away.
Implanted Medical Device wearers should consult their doctor and the device
manufacturer before going near arc welding, spot welding, gouging, plasma arc cutting,
or induction heating operations.
OVERUSE CAN CAUSE OVERHEATING:
Allow cooling period; follow rated duty cycle.
Reduce duty cycle before starting to weld again.
1.4 EMF INFORMATION:
This machine is manufactured in compliance with the instructions contained in the harmonized standard,
and must be used solely for professional purposes in an industrial environment. There may be potential
difficulties in ensuring electromagnetic compatibility in non-industrial environments. IN CASE OF
MALFUNCTIONS, REQUEST ASSISTANCE FROM QUALIFIED PERSONNEL.
2. GENERAL TECHNICAL DESCRIPTIONS:
MODEL:
SN
CE, EN
U20
I2CC
I2
1~50/60
U1N
Smax
Sn
www.celette.com
Model: EASY DENT 3000
CE EN60971-10
EN61000-3-12
~
I2cc=3000A
1~50/60Hz
Smax=20kVA
The model of the machine
Machine Serial Number which must appear on requests or inquiries
concerning the machine
International Standards
~ Alternating current (AC)
Range of rated AC no-load voltage and number of adjustable steps
Maximum short circuit current of the output corresponding to the minimum
independance
Output welding current
Single-phase input supply at 50 or 60 Hz
Rated supply voltage
Maximum power
Power at normal duty cycle
SN
U20=38V
I2p=1200A
Uin=200V~230V
Sn=3.3kVA
Page No: 7