CELETTE RAPID SPOT MINI Oryginalny podręcznik - Strona 4

Przeglądaj online lub pobierz pdf Oryginalny podręcznik dla System spawania CELETTE RAPID SPOT MINI. CELETTE RAPID SPOT MINI 15 stron.

1. SAFETY PRECAUTIONS:

Protect yourself and others from injury - read, follow, and save these important safety precautions and

operating instructions.

DANGER! Indicates a hazardous situation which, if not avoided, will result in death or serious

injury. The possible hazards are shown in the adjoining symbols or explained in the text.

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

The possible hazards are shown in the adjoining symbols or explained in the text.

Notice: Indicates statements not related to personal injury.

Indicates special instructions.

This group of symbols mean WARNING! WATCH OUT! ELECTRIC SHOCK, MOVING PARTS, and HOT PARTS

hazard. Consult symbols and related instructions below for necessary actions to avoid the hazards.

 The symbolds shown below are used throughout this manual to call attention to and identify possible

hazards. When you see the symbol, watch out, and follow the related instructions to avoid the

hazard. The safety information to avoid the hazard. The safety information given below is only a

summary of the more complete safety information found in the safety standards listed in section

below. Read and follow all safety standards.

 O nly qualified persons should install, operate, maintain, and repair this equipment. A qualified person

is defined as one who, by possession of a recognized degree, certificate, or professional standing, or

who by extensive knowledge, training and experience, has successfully demonstrated ability to solve

or resolve problems relating to the subject matter, the work, or the project and has received safety

training to recognize and avoid the hazards involved.

 During operation, keep everybody, especially children away.

SPOT WELDING CAN CAUSE FIRE OR EXPLOSION:

 Sparks can fly off from the welding arc. The flying sparks, hot workpiece, and hot

equipment can cause fires and burns. Accidental contact of electrode to metal

objects can cause sparks, explosion, overheating, or fire. Check and be sure the

area is safe before doing any welding.

 Remove all flammables within 35 ft (10.7 m) of the weld. If this is not possible, tightly cover them

with approved covers.

 Do not spot weld where flying sparks can strike flammable material.

 Protect yourself and others from flying sparks and hot metal.

 Be alert that welding sparks can easily go through small cracks and openings to adjacent areas.

 Watch for fire, and keep a fire extinguisher nearby.

www.celette.com

Page No: 4