DBI SALA Flexiguard 8530540 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt bezpieczeństwa DBI SALA Flexiguard 8530540. DBI SALA Flexiguard 8530540 18 stron. Adjustable jib boom fall arrest system

WARNING:
This product is part of a Personal Fall Arrest and Work Positioning system. The user must follow the manufacturer's instructions
for each component of the system. These instructions must be provided to the user of this equipment. The user must read and understand
these instructions before using this equipment. Manufacturer's instructions must be followed for proper use and maintenance of this equipment.
Alterations or misuse of this product or failure to follow instructions may result in serious injury or death.
IMPORTANT:
If you have questions on the use, care, or suitability of this equipment for your application, contact Capital Safety. For general
questions, refer to national Standards including the ANSI Z359 (.0, .1, .2, .3, and .4) family of standards on fall protection, ANSI A10.32, and
applicable local, state, and federal (OSHA) requirements governing occupational safety for more information about fall protection systems.
IMPORTANT:
Prior to installation and use of this equipment, record the product identifi cation information from the ID label in the
Inspection and Maintenance Log (Table 2) at the back of this manual.

PRODUCT DESCRIPTION:

Figure 1 illustrates the Flexiguard
boom mounted Glide Rail Fall Arrest Systems that rotate 360° on various base options. Systems with a Counterweight Base can
be transported with a Forklift, Pallet Jack, Crane, etc. Systems with a stationary Flush Mount Base or Floor Mount Base can be
transported from base to base with a Crane, Hoist, or Forklift with a Lifting Strap/Chain.
Figure 2 illustrates components of the Adjustable Jib Boom Fall Arrest Systems. See Table 1 for component identifi cation and
specifi cations. The Jib Rail Assembly (A) extends from an Adjustable Upright (B) and supports a Glide Rail (C) with a Four-
Wheeled Trolley (D) that travels back and forth in the Rail Halves. The Trolley is equipped with a 5/8" Eye for connection of a
Self-Retracting Lifeline or Energy Absorbing Lanyard.
The Adjustable Upright is mounted on a Hitch Ball Post (E) that is embedded in a concrete fi lled Counterweight Base (F),
embedded in concrete structure (G), or fastened to a concrete surface (H). The height of the Jib Boom is adjusted with a Hand
Crank (I) and Lifting Mechanism (J) that raise or lower the Adjustable Upright. The Adjustable Upright can be rotated 360° with
the foldable Rotation Handle (K) and locked at 11° increments with the Rotation Lock Pin Mechanism (L) or allowed to rotate
through a range defi ned by two Rotation Limiters (R). The bottom of the Counterweight Base has Lifting Channels (N) and Lifting
Eyes (O) for transport with a Forklift, Pallet Jack, Crane, etc. and Slope Indicators (P) to ensure the system is level. Optional
Leveling Jacks (Q) can be installed on the Counterweight Bases.
Component Specifi cations:
Figure 2
Reference
Component
Jib Rail Assembly
A
Adjustable Upright Assembly
B
Glide Rail
C
Four-Wheeled Trolley
D
Hitch Ball Post
E
Counterweight Base: 8530556
F
Flush Mount Base - 8530564
G
Floor Mount Base - 8530565
H
Hand Crank
I
Lifting Mechanism
J
Rotation Handle
K
Rotation Lock Pin Mechanism
L
Lifting Channels
M
Lifting Eyes
N
Slope Indicators
O
Jack Kit - 8530563
P
i-Safe™ RFID Tag
Q
Rotation Limiters
R
System Specifi cations:
Capacity:
1 Person per Glide Trolley with a combined weight (including clothing, tools, etc.) of no more than 420 lbs (191 kg)
Anchorage:
Structure supporting the Fall Arrest System must withstand a 8,800 lb (39 kN) vertical load.
DISTRIBUTED BY CAI SAFETY SYSTEMS | Phone: (888) 246 6999 | Web: caisafety.com | Email: [email protected]
Adjustable Jib Boom Fall Arrest Systems. The Adjustable Jib Booms are adjustable height
®
Table 1 – Specifi cations
Materials
Aluminum
Tubes - Steel
Rollers - Nylatron
Lifting Connection Point - Steel
Aluminum Rail Halves
Wheels - Nylon
Bearings - Steel
5/8" Eye - Stainless Steel
Tube - Steel
Hitch Ball Pivot - Steel
Steel
Concrete with Steel Rebar
Steel
Steel
Steel
Base - Aluminum
Chain & Chain Cover - Steel
Gears - Steel
Rollers - Plastic
Tube - Steel
Hand Grip - Rubber
Plate - Steel
Pin - Zinc Plated Steel
Steel
Steel
Plastic Gauge on Aluminum
C-Channel
Jack - Steel
Mounting Tubes - Steel
Mounting Pin - Steel
Nylon, Glass
Steel with Magnets
Rating
Connection Point - LIFTING ONLY,
not for Fall Protection: 1,200 lbs
(544 kg) Vertical () Load
1,800 lbs (817 kg) Vertical ()
Load
5,000 lbs (2,268 kg) Vertical ()
Load
Filled with 4,000 psi Concrete:
8530566 = 5,000 lbs (2,268 kg)
5,000 lbs (2,268 kg) Vertical ()
Load (1,250 lbs per Eye)
7,000 lb (3,175 kg) Top Wind
Jacks
Radio Frequency - 13.56 MHz
Assembly/Install
Instruction
5903390
5903390
5903390
5903402
5903387
5903386
8