Celexon Electric Professional Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do projektorów Celexon Electric Professional. Celexon Electric Professional 8 stron.
Również dla Celexon Electric Professional: Instrukcja obsługi (11 strony)

Drukuj stronę

IN THE BOX

1 x Screen

2 x Plates

INSTALLATION NOTES

Install the screen in a position that is fully visible to all viewers! The optimum

installation height corresponds to the position of the viewers in the centre of

the screen with the screen fabric extended: eye level = lower third of the screen

surface.

The screen can be installed on the wall/ceiling or hung from the ceiling on

closed ring eyelets plus screwable karabiners (the eyelets are already on the

side cap). For wall or ceiling installation only, the eyelets should be removed

in advance). Please make sure that the metal plates are also used for wall and

ceiling mounting, otherwise safe installation cannot be guaranteed).

The enclosed installation material is intended for a solid stone wall. If

necessary, obtain suitable mounting material for your installation surface.

MOUNTING ON THE CEILING (VIA EYELETS)

Attach the eyelets with the washers

and the plates and the nuts to the two

side caps and measure the distance

between the eyelets. Mark the points

on the ceiling and make sure

make sure that the eyelets are aligned

with each other and parallel to the wall.

4 x Plastic dowels

4 x Nut

4x Screws

2x Ceiling eyelets