Celexon HomeCinema CLR UST Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do projektorów Celexon HomeCinema CLR UST. Celexon HomeCinema CLR UST 12 stron. Electric floor high contrast screen
Również dla Celexon HomeCinema CLR UST: Instrukcja obsługi (11 strony)
Drukuj stronę
•
Suspended loads must be checked for strength and load-bearing capacity at least
twice a year.
•
Failure to observe the above instructions may result in personal injury and damage
to the product or equipment connected to it. Incorrect installation or use may also
invalidate the warranty.
•
If you are unsure about the use of the product, please contact specialist personnel,
your dealer or celexon directly (Web: www.celexon.co.uk, Mail: [email protected]).
•
Technical changes and errors expected.
The manufacturer accepts no responsibility for damage to property or personal injury, if
the screen is used outside the recommended specifications, or in the event of improper
installation. Do not use this screen in the vicinity of heaters or air conditioners. Also,
do not mount the product in direct sunlight or in front of a window. Due to the tempe-
rature-sensitive PVC surface, the projection screen fabric may be permanently damaged.
We recommend that you wait approx. 2 hours after delivery before installing the projecti-
on screen. This way you will allow the screen to acclimatise. If the screen is brought from
a cold to a warm environment, we recommend waiting approx. 24 hours before setting it
up. In order to be able to stretch the fabric optimally on the frame, the room temperature
or the product temperature should be 18 - 24 degrees.
Please avoid any stains on the surface of the screen. These may not be able to be re-
moved.
•
Be sure to note the front and back of the fabric when attaching.
•
Please check ALL parts for damage or scratches before assembling!
•
The fabric must ONLY be assembled on a soft, padded surface. The frame coating
and the delicate fabric may otherwise be scratched.
•
For a permanent flatness, observe the following instructions.
1.
Do not touch the projection screen surface with your hands.
2.
Do not fold or crease the projection screen surface under any circumstances.
3.
Do not paint or write on the projection screen surface.
2