Agrisan MT 12 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Urządzenia kuchenne Agrisan MT 12. Agrisan MT 12 17 stron.

3. Milling

„MT 12" is equipped with a 240 V and 50 Hz heavy duty industrial motor that

can be plugged in to any standard electrical outlet. Please make sure that „MT

12" is not set up near a moist working area.

4. Fine and coarse settings

By loosening the knob on the right upper hopper assembly of the mill can be

twisted to allow fine or coarse settings. The step less adjusting mechanism

allows any desired setting from coarsely ground to very fine, powdery flour

within a full turn of the hopper.

Coarse setting:

Loosen the knob and turn hopper clockwise to achieve the finest settings.

Standard setting:

With the factory adjusted finest setting (hopper fully turned clockwise) the

flour is recommended for all kinds of baking purposes and can also be used

for grains in slightly higher humidity. (When the mill is running without berries

the stones can be heard slightly rubbing on each other. When the machine is

milling, the elastically anchored stones are pushed apart by the grain berries

and the stones will be pushed apart and run smoothly.

Fine setting:

The mill can be adjusted to an even finer setting if very dry grain is used. In

shop setups this setting is not recommended. The rubbing of the stones is not

to be overheard when the mill is running in this setting. Motor and stones will

not be harmed, since the grain berries will push the elastic mounted stones

apart. Running the mill in the very fine setting without grain should be avoided.

IMPORTANT

When the mill is turned off and there is no grain between the stones, the mill

can be adjusted to every setting. If the hopper is full, the mill can be adjusted

to more coarse settings, but only during operation can it be adjusted to a finer

setting.