Auton ARS 37.5-30 Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Stojaki i stojaki Auton ARS 37.5-30. Auton ARS 37.5-30 4 stron. The authority in custom motorized lifts ceiling drop-down models

Drukuj stronę
Contents:
1 - Lift mechanism
Step 1: Testing
Use the guide below to assemble your new AUTON lift. If your unit came pre-assembled, go to the next page.
A.
B.
Connect the molex cords between the lift and the electronic box.
C.
Plug power cord into 115VAC outlet.
D.
Make sure all wires are routed away from gears and rack
Step 2: Installation
Each application may require various installation techniques. Please contact Auton for additional assistance.
OPTION 1:
A.
Attach mounting brackets to lift.
B.
Place brackets on pre-installed supports
Installation support:
and production techniques enable simple installation. However, unexpected issues may arise during installation. In the event that you
require assistance, do not hesitate to contact one of our technicians. We will be happy to answer your questions and resolve any problems
you encounter during the installation process.
Keep unit free of debris, keep covered prior to installation
1 - Control box
1 - Remote control
OPTION 2:
A.
Attach mounting brackets to lift.
B.
Connect mounting brackets to 1/2" threaded ceiling rods
We take great pride in knowing that we manufacture the best lift systems in the world. Our design
Phone Support: 661-257-9282, ext. 104
2 - Mounting brackets*
4 - Bolts for brackets*
* Pre-installed on CP units - not included on LCD units
Caution:
Do not operate lift while hands are
in close proximity to moving parts.
•
Email Support: [email protected]
4 - Nuts*