ADEN POWERKIT SPORT Instrukcja obsługi i montażu - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi i montażu dla Rower ADEN POWERKIT SPORT. ADEN POWERKIT SPORT 16 stron.
POWERKIT SPORT-ASSEMBLY INSTRUCTION
ADEN GmbH
ASSEMBLY
Fix the frame bracket to the upper seat stay (Allen key size 4).
The ideal distance to the centre of the axle is 21.5 cm - 22.5 cm.
Please choose the appropriate screw length.
Note: There should be sufficient distance between lever and
plastic ring, at least 1 cm.
The torque arm must be mounted perpendicular to the wheel
so that everything fits perfectly.
Fix the screws with approx. 3 Nm.
Caution:
Extreme caution is required with carbon frames.
Tighten the screws carefully not to endanger the material.
Note: Here there is the possibility to have a seat stay adapter
made according to the sketch of the seat stay.
Reinstall the rear wheel.
easily and that no brake cable or anything else is rubbing
against the belt ring.
www.aden-sports.com
Make sure that the wheel can be turned
EN | S. 7