Autonics AFE4-H20-16LF Skrócona instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Akcesoria Autonics AFE4-H20-16LF. Autonics AFE4-H20-16LF 4 stron.
Drukuj stronę
AFE Series
Specifications of sensor connector wire mount plug
12.5
4 3 2 1
-
Before
squeezing
●Cover color and wire specifications for sensor connector wire mount plug
Model
CNE-P04-WT
CNE-P04-YG
CNE-P04-VT
CNE-P04-RE
CNE-P04-YW
CNE-P04-OG
CNE-P04-GN
CNE-P04-BL
CNE-P04-GY
How to squeeze sensor connector wire plug
1)Insert wires.
lCheck the pin number and insert wires at the insertion part
of the cover.
lCheck the wires are inserted at the end of cover.
Sensor connector socket arrangement
B-18
※Sensor connector plug is sold separately.
16.5
After
squeezing
Applied wire specifications
Cover color
Norminal cross section
area (mm²)
Transparent(WT)
0.05 to 0.08
Yellow-Green(YG)
(AWG30 to 28)
Violet(VT)
Red(RE)
0.13 to 0.21
Yellow(YW)
(AWG26 to 24)
Orange(OG)
Green(GN)
0.32 to 0.5
Blue(BL)
(AWG22 to 20)
Gray(GY)
1
12-24VDC
2
I/O
3
GND
4
I/O
※No. 2 and 4 are connected
※Sensor connector wire plug is sold separately.
Refer to A-2 to 5 pages.
Cover diameter (mm)
ø 0.6 to 0.8
ø 0.8 to 1.0
ø 1.0 to 1.2
ø 0.8 to 1.0
ø 1.0 to 1.2
ø 1.2 to 1.6
ø 1.0 to 1.2
ø 1.2 to 1.6
ø 1.6 to 2.0
2)Squeeze the connector.
lInsert the cover to the body with tools (press fitting plier, etc).
lSqueeze it with tools at the side direction as below
figure.
(unit: mm)