Galactron MK 2250 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Galactron MK 2250. Galactron MK 2250 10 stron.

Your GALACTRON amplifier is ready out of the box to be plugged into the household wall outlet and to

other components of your hi-fi system without the need for internal setting.

DO NOT OPEN THE AMPLIFIER CASE FOR ANY REASON: ANY REPAIRS OR ADJUSTMENT TO

BE MADE INSIDE THE UNIT MUST BE PERFORMED BY A GALACTRON DEALER OR CERTIFIED

SERVICE CENTER.

To meet the acting regulations and ensure your safety, always disconnect the power cord from the main

power line before working on this equipment.

PLEASE READ THIS MANUAL CAREFULLY: GALACTRON AMPLIFIER DIFFER GREATLY

FROM ALL OTHER AMPLIFIER, AND THEIR CORRECT USE REQUIRES AN AT LEAST

CURSORY LEVEL OF INSTRUCTION.

PARTS LIST

In addition to this manual, the packing should include the following material:

 MK 2250 integrated amplifier

 power cord, meeting IEC specs

 infrared remote control

 guarantee card

POWER LINE REQUIREMENTS

The amplifier includes a separate power cord, which has an IEC norm socket on one end and a 10 A plug on

the other.

Before inserting the IEC socket into the recessed plug located on the rear panel of the amplifier (see the

Chapter on "Connections and Checks"), make sure the main power switch is in the OFF position.

switch in the ON position

The amplifier is factory wired for a nominal line voltage of 230+5% V:TO USE A DIFFERENT VOLTAGE,

CONTACT A GALACTRON SERVICE CENTER. The 230 V line voltage is the new European standard.

CONNECTING COMPONENTS

Connection with other pieces of audio equipment does not have special limitations. Be sure to use suitable

cables and connectors, so as not to degrade the exceptionally high performance of these amplifiers.

The various connection possible and the electrical specifications of the input and output are reported in detail

in the following chapters.

WARNING: CONNECTING THE SPEAKER OUTPUT TO THE LINE VOLTAGE OR ANY FORM OF

CURRENT GENERATOR WILL DESTROY THE FINAL POWER STAGE.

COMMANDS AND CONTROLS

GALACTRON integrated amplifiers do not have front panel commands, and their function are selected and

adjusted with the enclosed remote control.

The remote control is also normally used to turn the amplifier ON and OFF. If you plan not to use the

amplifier for an extended period of time, you can completely shut down the unit by setting the main power

switch to the OFF position.

BEFORE STARTING

top

down

switch in the OFF position