Galactron MK 2280 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Galactron MK 2280. Galactron MK 2280 10 stron.

The speakers are hooked-up incorrectly.

The power cable are interrupted.

A fuse might as blown into the amplifier's PC board.

The amplifier goes into PROTECTION mode, (power led orange)

One external or internal fuse might has blown.

Have the internal fuses checked by a suitable Service Station.

After being turned on with the power switch, the amplifier goes in stand-by and then goes On

automatically, regarding less the commands sent with the remote control. Symmetrically, once turned

off with the remote control, the amplifier goes in stand-by for four seconds and then goes On again.

Continues Power

Inputs

Signal to Noise Ratio

Peak Current Output

THD (at rated power)

Remote control

Weight

Check that the speakers are correctly connected to the output

If the connection are correct,

Check the continuity of the cables.

If they are not interrupted,

Have the amplifier checked from a suitable Service Station.

Check the external or internal fuse might has blown.

Check the external 3.5 A (or 7 A) main fuse.

The factory installed plastic plug has been removed.

Plug-in again the plastic lug or a simple RCA pin jack NOT short

circuited.

TECHNICAL SPECIFICATION

MK 2280

terminals.

2x80 W 8Ohm

2x152 W 4Ohm

2x220 W 2Ohm

4 unbalanced RCA

1 balanced XLR

s/n 100db

60 Ah

1.6%

infra red

30 Kg