Dynamite Vision Peak 2 Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ładowarka Dynamite Vision Peak 2. Dynamite Vision Peak 2 3 stron. Ac/dc peak detection charger

Drukuj stronę

Dynamite Vision Peak 2 Instrukcja obsługi

Trickle Charge

Once the battery has peaked, the charger

will automatically switch to trickle charge.

This feature will make sure that the

battery is fully charged when you are

ready to use it. You will know that the

charger has entered trickle when the

charger repeatedly beeps, and the LED

continuously flashes.

The battery pack will remain on trickle

charge until you either re-peak the pack

by pushing the Start/Select button or

disconnect the pack.

Re-Peak

To re-peak a battery, keep the battery

attached to the charge lead and push the

Start button. Do not unplug and reattach

the battery prior to re-peaking. This will

cause the battery to over-heat.

Voltmeter Jacks

A voltmeter jack is provided on the face-

plate of the Vision Peak

™

2, allowing you to

monitor the voltage level of the battery

pack. Simply insert the voltmeter's leads

into the respective positive and negative

jack and set the meter to display voltage.

5898

Changing the Fuse

The Vision Peak

™

2 uses a 2-amp fuse. If

you need to replace the fuse, unscrew the

fuse cap and replace it with a fuse of the

same rating. Replacement fuses (DYN4004)

are available from Dynamite

. You may

also find a replacement fuse at your local

auto supply store.

Safety Precautions

• Do not leave the battery and charger

unattended while in use.

• Always allow the charger to cool between

charge cycles.

• Never attach the charger to an AC and

DC power source simultaneously.

• While charging, constantly monitor the

temperature of the battery pack. If the

battery becomes hot, discontinue the

charging operation immediately by

disconnecting the battery pack.

• Carefully observe connector polarities

at all times.

• Children charging battery packs should

be supervised by a responsible adult.

Warranty and Repair Policy

This charger is guaranteed against work-

manship and manufacturing defects for a

period of 5 years from the original date of

purchase. This warranty is limited to the

original purchaser and is not transferable.

Warranty repair will not cover units that

have been modified, misused or serviced

by an unauthorized service center.

To speak to a service technician, call

877-504-0233.

If this charger needs to be repaired, ship

the charger in its original box (freight

pre-paid) to:

Horizon Service Center

Attn: Dynamite Service

4105 Fieldstone Rd.

Champaign, IL 61822

Include a brief summary of the difficulty.

Date your correspondence and be sure

that your name and address appear on

this enclosure. Also, please include a

phone number where you can be reached

during the business day. Include your

complete name and address and informa-

tion inside the carton, as well as clearly

writing it on the outer label and return

address area.

Warranty Repairs

To receive warranty service, you must

include your original sales receipt verifying

proof-of-purchase date. Providing warranty

conditions have been met, your charger

will be repaired free of charge.

Non-Warranty Repairs

Should the repair cost exceed 50% of

the retail purchase cost, you will be pro-

vided with an estimate advising you of

your options. Any return freight for non-

warranty repairs will be billed to the

consumer.

For non-warranty repairs, please

advise us of the credit card you prefer

to use. Horizon Service Center accepts

money orders, Visa or MasterCard.

Please include your card number and

expiration date.

Dynamite

is an exclusive brand of Horizon Hobby, Inc.

4105 Fieldstone Rd., Champaign, IL 61822