Dynamite PLATINUM Series Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Silnik Dynamite PLATINUM Series. Dynamite PLATINUM Series 4 stron.

Drukuj stronę
DYNP5526
DYNP5526
DYNP5522
DYNP5519
DYNP5526
DYNP5542
DYNP5526
DYNP5551
DYNP5551
DYNP5554
DYNP5550
DYNP5552
DYNP5553
DYNP5549
DYNP5524
DYNP5519
DYNP5528
DYNP5547
DYNP5546
DYNP5545
DYNP5550
DYNP5548
DYNP5520
DYNP5519
DYNP5521
DYNP5543
DYNP5541
DYNP5519
DYNP5511
DYNP5537
Spare Parts Listing
Stock #
DYNP5380
DYNP5507
DYNP5511
DYNP5513
DYNP5515
DYNP5517
DYNP5519
DYNP5520
DYNP5517
DYNP5521
DYNP5530
DYNP5522
DYNP5531
DYNP5524
DYNP5532
DYNP5526
DYNP5533
DYNP5530
DYNP5534
DYNP5531
DYNP5535
DYNP5532
DYNP5507
DYNP5533
DYNP5534
DYNP5536
DYNP5535
DYNP5536
DYNP5537
DYNP5539
DYNP5540
DYNP5540
DYNP5380
DYNP5541
DYNP5542
DYNP5513
DYNP5543
DYNP5544
DYNP5545
DYNP5546
DYNP5547
DYNP5548
DYNP5549
DYNP5515
DYNP5550
DYNP5551
DYNP5539
DYNP5552
DYNP5553
Description
Front Bearing: DPS .18RE/.21XP
Wrist Pin Clips (2): DPS .12/.18RE
Rear Bearing: DPS .12/.18RE
Collet: DPS .12/.18RE
Carb Retainer Post: DPS .12/.18RE
Cylinder Head Screw(4):
DPS .12/.18RE
2 Needle Carb O-Ring Set:
DPS .12/.18RE
High Speed Adj. Needle:
DPS .12/.18RE
High Speed Needle Holder:
DPS .12/.18RE
Low Speed Adj. Needle: DPS .12/.18RE
Idle Screw: DPS .12/.18RE
Throttle Lever/Boot/Spring/Nut:
DPS .12/.18RE
Cylinder Head/ Blue: DPS .18RE
Head Button: DPS .18RE
Head Shim, .1mm (3): 18RE
Head Shim, .2mm (3): 18RE
Piston/Sleeve: 18RE
Wrist Pin: 18RE
Connecting Rod:18RE
Crankshaft Pull Start: DPS 18RE
Crankcase: DPS 18RE
Carburetor: 18RE
Carburetor Body: DPS 18RE
Throttle Barrel: DPS 18RE
Fuel Inlet Nipple: DPS 18RE
Pull Starter Complete: DPS .18RE
Pull Start Backplate: DPS .18RE
Backplate O-ring (2): DPS .12/.18RE
Pull Start One Way Bearing: DPS .18RE
Pull Start Shaft: PDS .18RE
Pull Start Cushion Spring: DPS .18RE
Pull Start Screw Screw Set: DPS .18RE
Pull Start Handle w/Extension:
DPS .18RE
Pull Start Recoil Spring: DPS .18RE
Pull Start Rope/Pully: DPS .18RE