hifold Fit-and-fold booster HF02-GB Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Fotelik samochodowy hifold Fit-and-fold booster HF02-GB. hifold Fit-and-fold booster HF02-GB 16 stron.

Drukuj stronę

To remove seat covers for cleaning:

Note: The cover is made up of three sections,

one headrest, one backrest and one base

section. Each section includes the middle and

two side sections.

Start from the headrest

and base

Removal of Headrest Cover:

•

Remove Headrest

Side covers first by

starting at top rear

corner and pulling

Headrest Side Cover

off top of the inner

foam and then

continue around the

front and lower edge.

•

Pull top center

section of the top

and free from the

inner foam and

then free at the

lower edge.

Reverse this

process to refit.

Removal and Cleaning of Seat Cover

and backrest

Removal of Seat Back Cover:

•

Similar to the headrest

cover, remove the side

panel sections by peeling

away from the inner foam.

To release the central

section pull forward and

unhook elastic loops (4 on

each side) from plastic

seat back

•

Reverse this process to

refit the cover.