Dynamite Li-Po Glow Driver Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Systemy kontroli Dynamite Li-Po Glow Driver. Dynamite Li-Po Glow Driver 6 stron. With battery and charger
Drukuj stronę
WaRning: This product is not a toy. To ensure
proper function and to avoid risk of injury and damage,
read and follow all instructions before operating the
product. Lithium Polymer (LiPo) batteries are
significantly more volatile than other rechargeable
batteries used in RC applications. Failure to read and
follow these instructions and safety precautions may
result in fire, personal injury and damage to property.
Horizon Hobby, Inc., its retailers, and any other
representatives, assume absolutely no liability for use
of this product or failure to comply with these
instructionsand precautions.
cauTion: Attempting to charge batteries different
that those provided can result in excessive heat, puffing
and other related product malfunctions, which can
lead to user injury or property damage. Please
contact Horizon Hobby or an authorized retailer with
compatibility questions.
WaRning: Read all instructions before use. Lithium
Polymer (Li-Po) batteries are very volatile. Never leave
charger unattended, near flammable material or in
extreme temperatures as excessive heat, fire, damage
and injury can occur. Use only with compatible lithium
batteries.
oTHeR WaRningS anD pRecauTionS
Failure to exercise caution while using this product
and comply with the following warnings could result in
product malfunction, electrical issues, excessive heat,
FIRE, and ultimately injury and property damage.
•
Read all safety precautions and literature prior to
use of this product.
•
Never leave the battery and charger unattended
during use.
•
Never attempt to dismantle the charger.
•
Never attach your charger to both an AC and DC
power source at the same time.
•
Never connect the charger to an automobile 12V
battery while the vehicle is running.
•
Never reverse the positive and negative terminals.
Wrong connection will damage the battery and may
cause damage to the charger.
•
Never allow minors to charge battery packs without
adult supervision.
•
Never drop charger or batteries.
2
•
Never attempt to charge dead or damaged
batteries.
•
Never attempt to charge a battery pack containing
different types of batteries.
•
Never charge a battery if the cable has been pinched
or shorted.
•
Never allow batteries or battery packs to come into
contact with moisture at any time.
•
Never charge batteries in extremely hot or cold
places (recommended between 50–80º F) or place
in direct sunlight.
•
Always use only rechargeable batteries. This charger
cannot charge batteries such as "heavy duty,"
"Alkaline battery," "Nickel", or "Mercury battery."
•
Always connect the positive red lead (+) and
negative black lead (-) terminals of the battery to the
charger terminals correctly.
•
Always disconnect the battery after charging, and let
the charger cool between charges.
•
Always inspect the battery before charging.
•
Always terminate all processes and contact Horizon
Hobby if the product malfunctions.
•
Always keep batteries and charger away from any
material that could be affected by heat (such as
ceramic and tile), as they can get hot.
•
Always monitor the area, use a fire alarm and have a
fire extinguisher available at all times.
•
Always ensure program settings are correct to
prevent battery damage or fire.
•
Always make sure you know the specifications of
the battery to be charged or discharged to ensure it
meets the requirements of this charger. If the
program is set up incorrectly, the battery and
charger may be damaged. Improper settings can
cause the battery to become overcharged potentially
leading to fire or explosion.
•
Always connect the charge cable to the charger
first, then connect the battery to avoid short circuit
between the charge leads. Reverse the sequence
when disconnecting.
•
Never connect more than one battery pack to this
charger at a time.
3