Galanz RED380JDH-PAHH0A Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kuchenka mikrofalowa Galanz RED380JDH-PAHH0A. Galanz RED380JDH-PAHH0A 19 stron. 1.4cu.ft. oven-the-range microwave

Galanz RED380JDH-PAHH0A Podręcznik użytkownika
Use only thermometers, which are specifically designed for use in microwave ovens.
This appliance should be serviced only by qualified service personnel, contact nearest authorized
service facility for examination, repair, or adjustment.
When cleaning surfaces of door and oven that comes together on closing the door, use only mild,
nonabrasive soaps, or detergents applied with a sponge or soft cloth.
This equipment has been tested and found to comply with Part 18 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired
operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the product.
VENTILATING HOODS
-
Clean Ventilating Hoods Frequently-Grease should not be allowed to accumulate on hood or
filter.
-
When flaming foods under the hood, turn the fan on.
Use care when cleaning the vent-hood filter. Corrosive cleaning agents, such as lye-based oven
cleaners, may damage the filter.
Suitable for use above both gas and electric cooking equipment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-
Consult the dealer or an experienced radio/TV technician for help.
SAVE THESE INSTRUCTIONS
3