Dynamix Tiger 2Plus Podręcznik użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Router sieciowy Dynamix Tiger 2Plus. Dynamix Tiger 2Plus 17 stron. (4lan) adsl 2+ router
Drukuj stronę2.1.2 SPLITTER SPEC
2.2 HARDWARE CONNECTION
Introduction
1
Use a telephone cord to connect the LINE port of the splitter with the RJ-11 port (the phone
jack) on the wall.
2
Use another telephone cord to connect the ADSL port of the splitter with the LINE port of the
ADSL Modem.
3
Use another telephone cord to connect the telephone set with the PHONE port of the splitter.
4
Connect Ethernet port of the ADSL MODEM with 10/100BASE-T port of the computer using
the network cable that comes with the modem.
5
Plug in the power cord, and turn on the power.
If you do not want Internet services and telephone voice services simultaneously, please just
connect the LINE port of the ADSL Modem with the RJ-11 port (the phone jack) on the wall using a
telephone cord. In this case, the splitter is not necessary.
2.3 LED STATUS INDICATION
Status
POWER
(red)
Steady light
Power on
Flashing
/
Fast
/
flashing
Off
Power off
Table 2.2
Interface
Introduction
LINE
Connected with telephone line
Connect with the LINE port of
ADSL
the
ADSL
telephone line provided.
PHONE
Connect with telephone
Table 2.3
DSL (yellow)
The modem is in good
connection
In handshaking status
/
Connection not set up
Page 5
Tiger 2Plus (4LAN) ADSL 2+ Router
Modem
using
INTERNET (green)
Connected with PC
/
Transmitting
or
receiving data
Not connected with
PC properly
User Manual
LAN(green)
Ethernet
line
connected
/
Transforming data
Ethernet line not
connected properly
Total 17 Pages
is