Emerson 1061 Instrukcja obsługi
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Jednostka sterująca Emerson 1061. Emerson 1061 20 stron. Design ball valve
Drukuj stronę
Instruction Manual
Form 5206
April 2004
Design V250 Ball Valve
Contents
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction
Scope of Manual
This instruction manual provides installation,
maintenance, and parts ordering information for 4
through 24-inch Design V250 valves (figure 1) that
mate with ANSI flanges. Other instruction manuals
provide information covering the actuator and
accessories.
No person may install, operate, or maintain a Design
V250 valve without first D being fully trained and
qualified in valve, actuator, and accessory
installation, operation, and maintenance, and D
carefully reading and understanding the contents of
this manual. If you have any questions about these
instructions, contact your Fisher sales office before
proceeding.
www.Fisher.com
1
1
1
3
4
. . . . . . . . . .
6
. . . . . . . . . . . . .
6
. . . . . . . . . . .
7
7
. . . . . .
8
. . . . . . . . . . . . . . . . . .
8
. . . . . . . .
9
. . . . . . .
9
9
12
14
14
16
16
W3698 / IL
Figure 1. Design V250 Ball Valve with
Type 1061 Actuator
Description
Design V250 Hi-Ballr valve is a flangeless rotary
control valve used for high pressure, throttling or
on-off control of liquid or gas applications (see figure
1). These valves operate on a rotary motion input
through a splined valve-shaft/actuator-shaft
connection for use with power or manual handwheel
actuators. The single seal, dual seal, and flow ring
constructions are covered in this instruction manual.
Fisher does not assume responsibility
for the selection, use, or maintenance
of any product. Responsibility for
proper selection, use, and
maintenance of any Fisher product
remains solely with the purchaser and
end-user.
V250 Valve
Note