ADENDORFF MCll00 Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Tokarka ADENDORFF MCll00. ADENDORFF MCll00 18 stron. Variable speed wood lathe
Drukuj stronę
m.
Specific safety rules for the wood lathe-Continued
16. leave the work area only after the lathe's motor has come to a (ull stop.
17. Hang your turning tools on the wall beyond the tailstock end of the lathe. Do not lay
them on the bench so that you must reach over the revol'
18. Keep a firm hold and remain in control of the cutting tool at all times. Take special
precautions when shaping a section of stock in which knots or voids are found.
19. AJways make safety come first.
20. Complete the hand-sanding of all workpieces BEFORE you remove them from the lathe.
THE
IN
EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of
least resistance for electric current to reduce the risk of electric shock. This tool is equipped
with an eiectric cord that has an equipment grounding conductor and a grounding plug. The
plug MUST be plugged into a matching outlet that is properly installed and
grounded in accordance with ALL local codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED. If it will not fit in the outlet, have the proper
outlet installed by a qualified electrician.
IMPROPER CONNECTION of the equipment grounding conductor can result in risk of
electric shock. The conductor with the green insulation (with or without yeHow stripes)
is the equipment grounding conductor. If repair or replacement of the electric cord or plug
is necessary, DO NOT connect the equipment grounding conductor to a live terminal.
CHECK with a qualified electrician or service person if you
do not completely understand the grounding instructions, or if
you are not sure the tool is properly grounded.
USE ONLY THREE WIRE EXTENSION CORDS that have
3-prong grounding type plugs and 3-hole receptacles that
accept the tool's plug as shown in Fig. A. Repair or replace
damaged or worn cord immediately.
CAUTION: IN ALL CASES, MAKE CERTAIN THE RECEPTACLE IN QUESTION IS
PROPERLY GROUNDED. IF YOU ARE NOT SURE, HAVE A CERTIFIED ELECTRICIAN
CHECK THE RECEPTACLE.
'---- -- - ---- - - - -----15
SAVE THESE SAFETY RULES
Electrical information
N.
GROUNDING INSTRUCTIONS
SAVE THESE SAFETY RULES
ing workpiece to select them.
✓
��., �
IJ.......--::::::::::::::-
----- - - - - - - -- - --'
1--
w
t--'
Groonclng Pr009
Properly Grounded
�
3-Proog Outlet
FIGURE A