Dynamode 850VA Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla UPS Dynamode 850VA. Dynamode 850VA 2 stron.

DYNAMODE 850VA UPS

UPS voltage warning procedures

The Dynamode UPS has both visible and audible warnings in the event of a Power

Outage or other Power problem. The table below is a summary of these:-

Sound Indication

Single Surge

Bleep, 4 Secs

Bleep, 1 Secs

Silent

Turning off the UPS

The Dynamode 850VA UPS is designed to be left on continually. However, in order to

maintain Battery performance the UPS can benefit from being switched off if not needed

for any long duration.

Please Press the front, top right button for around 3 seconds to turn the UPS off.

Replacing the Fuse and Troubleshooting

The Dynamode 850VA UPS has a user replaceable glass fuse located under the Power

Input IEC. To access this, please (with the UPS turned off and unplugged from any Power

Source) carefully pull forward the notch which holds two fuses.

Examine the existing fuse; if the wire is not continuous then it is blown. Replace the fuse

with the spare next to it, push back the fuse holder and connect and turn on the UPS in

the normal way.

WARNING: There are no user serviceable parts in this UPS. The

internal sealed Battery is NOT user replaceable.

Please contact your supplier if you have any issues with this UPS

Quick Start Guide, continued

LED Status

Red LED

Green LED

Yellow LED

Description

Power Cut

Battery dead

Power Normal

Battery Charged

Solution

Check feed

Re-charge

N/A