Galax Pro 766V-L Instrukcja obsługi i instrukcje bezpieczeństwa - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instrukcje bezpieczeństwa dla Piła Galax Pro 766V-L. Galax Pro 766V-L 15 stron. Mini

tools. Such preventive safety measures reduce the risk of starting the power tool

accidentally.

Store idle power tools out of the reach of children and do not allow persons unfa-

miliar with the power tool or these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts, break-

age of parts and any other condition that may affect the power tools operation. If

damaged, have the power tool repaired before use. Many accidents are caused by

poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those intended could

result in a hazardous situation.

Service

Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

DANGER: Keep hands away from cutting area and blade. Keep your second

hand on auxiliary handle or motor housing. If both hands are holding the saw, they

cannot be cut by the Original instructions blade.

Do not reach underneath the workpiece. The guard cannot protect you from the

blade below the workpiece.

Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of

the blade teeth should be visible below the workpiece.

Never hold piece being cut in your hands or across your leg. Secure the work-

piece to a stable platform. It is important to support the work properly to minimize

body exposure, blade binding, or loss of control.

Hold power tool by insulated gripping surfaces when performing an operation

where the cutting tool may contact hidden wiring or its own cord. Contact with a

"live" wire will also make exposed metal parts of the power tool "live" and shock the

operator.

When ripping always use a rip fence or straight edge guide. This improves the

Mini Circular Saw

Owner's Manual & Safety Instructions

.03.