909 DWL850 Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie 909 DWL850. 909 DWL850 12 stron. 600w dowel joiner
Drukuj stronę•
Use only good quality drill bits that are suitable for the
tool.
•
Do not use drill bits that are damaged or misshapen.
•
If you want to use only one drill bit in your Dowel
Machine, remove both the drill bit and retaining grub
screw fully as the grub screw could come out at high
speed and could be dangerous to yourself or a bystander.
•
Only use drill bits with a diameter from 6mm to 10mm.
•
Use this tool only for drilling into timber and wood
products such as particle board.
•
Ensure that you have removed foreign objects such as
nails and screws from the work before commencing work.
•
Rags, cloths, cord, string and the like should never be left
around the work area.
•
Use safety equipment including safety goggles or shield,
ear protection, dust mask and protective clothing
including safety gloves.
Wear goggles
Wear earmuffs
Wear a breathing mask
WARNING.
We recommend the use of a residual current
device with a residual current rating of 30mA or less.
Accessories
The 909 DWL850 Dowel Joiner is supplied with the
following accessories as standard:
•
2 drill bits of 10mm diameter
•
Hex key
•
Instruction Manual
Unpacking
Due to modern mass production techniques, it is unlikely
that your 909 Power Tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
6