909 BN210 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Piła 909 BN210. 909 BN210 16 stron. 1400w 210mm (8 1/4") compound mitre saw

Drukuj stronę

Mitre table locks

The mitre table locks (15) are

used to lock the table at the

desired mitre angle

(Fig. D1 - D2).

The mitre saw cuts from 0°

to 45° both left and right. To

adjust the mitre angle loosen

the mitre table locks and

rotate the mitre table to the

desired position. The mitre

table features positive click

stops at 0°, 15°, 22.5°, 30°

and 45° for quick setting of

common mitre angles.

WARNING.

Be sure to tighten

the mitre table locks before

making a cut. Failure to do so

could result in the table moving

during the cut and cause

serious personal injury.

Bevel lock

The bevel lock (7) is used to

set the blade at the desired

bevel angle (Fig. E1). The

mitre saw bevel cuts from

0° to 45° to the left. To adjust

the bevel angle loosen the

bevel lock and adjust

the saw arm to the desired

bevel angle (Fig. E2).

WARNING.

Be sure to tighten

the bevel lock before making

a cut. Failure to do so could

result in the saw arm moving

during the cut and cause

serious personal injury.

Spindle lock button

The spindle lock button (18)

prevents the blade in the

saw from rotating (Fig. F).

Depress and hold the spindle

lock button while installing,

changing, or removing the

blade.

Rotating lower

blade guard

The rotating lower blade

guard (5) provides protection

from both sides of the blade

(Fig. G). It retracts over the

upper blade guard (4) as

the saw is lowered into the

workpiece.

Turning on and off

1. To turn the saw on depress

and hold the on/off trigger

switch (16) (Fig. H).

2. To turn the saw off release

the on/off trigger switch

(16).