ADENDORFF MAC AFRIC SDRILC-005 Oryginalna instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Oryginalna instrukcja obsługi dla Wkrętak sieciowy ADENDORFF MAC AFRIC SDRILC-005. ADENDORFF MAC AFRIC SDRILC-005 14 stron. Cordless brushless driver/hammer drill
Drukuj stronę
controlled with the switch is dangerous and must be repaired.
19. Disconnect the plug from the power source and/or the battery from the power tool
before making any adjustments, changing accessories, or storing power tools.
preventive safety measures reduce the risk of starting the power tool accidentally.
20. Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool.
dangerous in the hands of untrained users.
21. Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool's operation. If damaged,
have the power tool repaired before use.
maintained power tools.
22. Keep cutting tools sharp and clean.
cutting edges are less likely to bind and are easier to control.
23. Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed.
power tool for operations different from those intended could result in a hazardous
situation.
Battery Tool Use and Care
24. Recharge only with the charger specified by the manufacturer.
suitable for one type of battery may create a risk of fire when used with another
battery.
25. Use power tools only with specifically designated batteries.
may create a risk of injury and fire.
26. When battery is not in use, keep it away from other metal objects like: paper clips, coins,
keys, nails, screws, or other small metal objects that can make a connection from one
Shorting the battery terminals together may cause sparks, burns, or
terminal to another.
a fire.
27.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help.
Liquid ejected from the battery may cause irritation or burns.
Power tools are
Many accidents are caused by poorly
Properly maintained cutting tools with sharp
Use of the
A charger that is
Use of any other batteries
-3-
Service
28. Have your power tool serviced by a qualified repair person using only identical
Such
replacement parts.
Driving in and loosening screws.
Drilling in wood, metal, wall and plastic.
Power (DC)
Max. Chuck Clamping Capability
Max. Screw Diameter
Battery
No Load Speed
Impact Frequency
Output Spindle Threads
Max. Drilling Capacity
Torque Setting Steps
Max. Torque
Full Charging Time
Net Weight（Match 2.0Ah battery pack)
Net Weight（Match 2.0Ah battery pack)
※ Due to the continuing program of research and development, the specifications herein
are subject to change without prior notice.
This will ensure that the safety of the power tool is maintained.
APPLICATIONS
SPECIFICATIONS
Type
Capacitor
2.0Ah
Low
400 r/min
High
2000 r/min
36000 IPM
1/2-20 UNF
Steel
Concrete
Wood
≈45 mins
2.0 Ah
(charge current:
-4-
3A)
≈90 mins
4.0 Ah
(charge current:
3A)
18V
13mm
10mm
Li-on
4.0Ah
φ13mm
φ14mm
φ38mm
25+2
70Nm
≈70 mins
(charge current:
2A)
≈135 mins
(charge current:
2A)
1.9KG
2.2KG