dbx DriveRack PA+ Skrócona instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Wzmacniacz dbx DriveRack PA+. dbx DriveRack PA+ 16 stron. 2-way setup

28.
AUTO-EQ
Mic Level
TURN UP LEVEL
Pink Level
28A - Turn the Data Wheel until pink noise is playing
through your speakers at performance level (-5 dB to +5
dB). The words "Set to performance level" will appear
in the display when you have passed the minimum
threshold. Set level higher if needed.
NOTE: Don't clip amps.
29.
29 - Auto EQ will go through some audible changes as it tunes the
speakers to the room. This may take several minutes.
30.
AUTO-EQ
<NEXT PG> to advance
30A - Auto EQ will complete or finish sending
pink noise once it has come as close as possible
to matching the response you selected earlier.
Pink Noise
˘-InfdB
Complete
28B - Once your performance
level is reached, press the NEXT
PG button.
30B - Press the NEXT PG button to
begin the AFS Wizard.