909 T12 Series Podręcznik - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik dla Wiertarka 909 T12 Series. 909 T12 Series 17 stron.

Drukuj stronę

• Store battery pack in well ventilated, dry and cool conditions, and

avoid direct sunlight and rain.

6). SERVICING

• Have your power tool serviced by a qualified repair person using only

identical replacement parts. This will ensure that the safety of the

power tools is maintained.

SAFETY WARNINGS FOR CORDLESS DRILLS

• Wear ear protectors when impact drilling. Exposure to noise can

cause hearing loss.

• Hold power tools by insulated gripping surface ,when performing

an operation where the cutting accessory or fastener may contact

hidden wiring. Cutting accessory and fasteners contacting a "live"

wire may make exposed metal parts of the power tool "live" and

could give the operator an electric shock.

• Use appropriate detectors to determine if utility lines are hidden in

the work area or call the local utility company for assistance. Contact

with electric lines can lead to fire and electric shock. Damaging

a gas line can lead to ecplosion.Penetraing a water line causes

property damage or may cause an electric shock.

• Switch off the power tool immediately when the tool inserts jams. Be

prepared for high reaction torque that can cause kickback. The tool

inserts jams when:

- the power tool is subject to overload or

- it becomes wedged in the workpiece.

• Hold the machine with a firm grip. High reaction torque can briefly

occur while driving in and loosening screws.

• Secure the workpiece. A workpiece clamped with clamping devices

or in a vice is held more secure than by hand.

• Keep your workplace clean. Blends of materials are particularly

dangerous.Dist from light alloys can burn or explode.

• Do not open the battery. Danger of short-circuiting.

• In case of damage and improper use of the battery, vapours may

be emitted Provide for fresh air and seek medical help in case of

complaints. The vapours can irritate the respiratory system.

• Use the battery only in conjunction with this power tool. This

measure alone protects the battery against dangerous overload.

Touch_IM_ED8.indd 9

• Use only original 909 batteries with the voltage listed on the

nameplate of your power tool. When using other batteries, e.g,

imitations, reconditioned batteries or other brands, there is danger of

injury as well as property damage through exploding batteries.

ADDITIONAL INSTRUCTIONS FOR WORK WITH

THE BATTERY/CHARGER

WARNING:

If the battery pack is cracked or damaged

in any other way, do not insert it in the charger. There is a

danger of electric shock.

WARNING:

Do not allow any liquid to come into contact

with the charger. There is a danger of electric shock.

• Before using the charger, read all the instructions and cautionary

markings on the charger and battery pack as well as the instructions

on using the battery pack.

• Keep the charger away from rain or damp. Water entering into the

charger will increase the risk of an electrical shock,

• Only use chargers recommended by the manufacturer to recharge

the battery. When using a charger designated for a particular type of

battery, there is a risk of fire if it is used with other batteries.

• Never use to recharge third-party batteries. The charger is only

designed to charge the supplied batteries (Li-Ion) using the voltages

specified in the Technical Data. Otherwise there is a risk of fire or

explosion.

• Keep the charger clean. Contamination will increase the risk of an

electrical shock.

• Check the charger, cable and plug each time you use the unit. Do

not use the charger if you find any damages. Never open the charger

up yourself, have it repaired by a qualified specialist only and with

original replacement parts. A damaged charger, cable or plug will

increase the risk of an electrical shock.

• Never operate the charger on a surface that will burn easily (for

example, paper, textiles etc) or in a flammable environment. There

is a risk of fire occurring as a result of the heat generated during the

charging process.

• Fluid can escape from the battery when used incorrectly. Avoid all

contact with this. In the event of accidental contact, rinse with water.

If liquid should get into the eyes, get medical assistance. Battery fluid

may result in skin irritations and burns.

22/10/13 4:39:56 PM