Dynaplug Mini Pro Inflator GT Skrócona instrukcja obsługi
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Elektronarzędzie Dynaplug Mini Pro Inflator GT. Dynaplug Mini Pro Inflator GT 2 stron.
Drukuj stronę
SPECIFICATIONS*
Max Pressure
Flow Rate
Weight
Air Outlet
Additional Fittings
Inflation Rate
Run Duration
Voltage
Max Current
Power
Noise
Motor
Dimensions
Power Cord Length
Recommended Fuses
Air Hose Length
Certfications
Warranty
Accessories, instructions, videos &
helpful hints
Customer Service
LIMITED WARRANTY
The period of W arranty is one year from the date of purchase by the original purchaser. Defects
in material and workmanship, which occur within the duration of the warranty, are covered with
some exceptions that are detailed on www.dynaplug.com. It's the responsibility of the
purchaser to provide dated proof of purchase, to contact [email protected] to obtain
warranty service options and to use reasonable care in the operation and maintenance of the
Inflator as described in this manual. Customer is responsible for warranty repair shipping.
TROUBLESHOOTING
Inflator does not turn ON
Push power plug firmly into receptacle, then twist it back and forth; check receptacle and plug terminals
for dirt (don't use fingers or metal); check vehicle's power outlet fuse—it should be 15amps minimum.
Inflator does not inflate
Be sure connector is on valve stem securely and well threaded. Check tire for leaks, and check hose
for breaks and leaks at fittings.
How to check/change the cigarette plug fuse
Unscrew tip of plug adapter, remove fuse and inspect. If necessary, replace fuse with one of the same
amperage.
Inflator is running slowly
The battery voltage may be too low. Check battery with a volt meter.
Tire is totally deflated
Sometimes a totally deflated tire can separate from rim and air can leak during inflation. If this
happens, you could jack up the tire before inflating it to allow bead to seat.
2
50PSI/3.45BAR/3.5kg/cm
0.50cfm @ 0psi/14lpm@0psi
18.2oz/516g
Zero Loss Inflation Valve Stem Connector
Sports Inflator Tips (3)
7 minutes, 195/60/R15 tire
30 minutes/20 minutes cool down time
12VDC
5AMP
60W
69 dB
Geared, fan cooled
4.75"X6"X2"/120mmx150mmx50mm
9.84'/3.0m
Cigarette Lighter Receptacle: 15AMP
Cigarette Plug: 250V/8AMP slow blow
3.28'/1.0m
CE, RoHS, TUV Factory
Limited One Year
www.dynaplug.com or [email protected]
For information regarding operation or repair,
please call 1.530.345.8000
*Specifications subject to change without notice
DYNAPLUG® MINI PRO INFLATOR GT
The Dynaplug® Mini Pro Inflator GT, Model DMPI-1441, is the ideal product
choice to inflate and to maintain proper pressure in tires on motorcycles,
vehicles, ATV's, trailers, bicycles and in many other inflatables.
FEATURES AT A GLANCE
Rugged and Compact ABS Case
Polyurethane Coiled Air Hose Stores Onboard
Bright and Efficient LED Work Light
Zero Loss Inflation Valve Stem Connector
Accurate, Easy-to-Read LED Backlit Pressure Gauge
Gauge reads in Bar (red) and PSI (black)
PolarChex™ Polarity Protection
Power Plug adapts to standard cigarette and BMW-style sockets
WARNINGS BEFORE USE
Please read and save these instructions. Read carefully before attempting to
operate. Protect yourself and others by observing all safety information. Failure to
comply with instructions could result in voiding the Warranty, personal injury and/or
property damage.
For use with 12VDC outlet rated 10Amps or higher.
DO NOT leave Inflator unattended while the unit is running.
Over inflation can cause property damage and/or personal injury.
Never exceed the recommended pressure for any inflatable.
© Dynaplug 2014 Chico CA USA
Model DMPI-1441