Galaxy Control Systems 635-DRM Szybkie kroki

Przeglądaj online lub pobierz pdf Szybkie kroki dla Sprzęt komputerowy Galaxy Control Systems 635-DRM. Galaxy Control Systems 635-DRM 2 stron. How to flash daughter boards using factory port

Drukuj stronę

How to Flash Daughter Boards using Factory Port (Quick Steps)

This describes how to flash daughter boards using a 635-CPU Board's native Factory Test Functions and FTS cable.

MATERIALS AND REQUIREMENTS

Materials 

• Laptop/PC and Cat5e cable

• Galaxy Installation USB drive (with FTS Flash files)

• Factory FTS Cable – PN: 81-0680-00

• 635-CPU (minimum Flash v. 10.4.9)

• Target Daughter Board (600 or 635)

• The CPU Panel Status page has links at the bottom

of the page to get to other pages listed herein.

PART 1 - CONNECT AND POWER-UP 635-CPU AND TARGET BOARDS

Power up the 635-CPU using a 12 Vdc power source.

Connect 635-CPU to a Laptop/PC using Cat5e cable

Open the native Panel Status page by typing the CPU's IP Address into a Browser (

Record the serial number of the target Daughter Board (you need this for a later step).

Power up the target Daughter Board using a 12 Vdc power source.

Connect the Factory FTS Cable from the CPU Factory Test port and the Daughter Board Factory Test port.

PART 2 - DISABLE ALL EVENT SERVERS (VIA THE PANEL WEB PAGE)

Click the Panel Configuration page and uncheck all Event Servers (1 - 4). Click the Update button to save settings.

PART 3 - CONFIRM THE FLASH FILE VERSION

The New 635-CPU board ships with the 'current flash', the native Factory Test Station, and the embedded Flash.

8. Click the Factory Function page and verify if the Embedded Column's flash version matches your Target Flash Version ...

IF the Embedded Column matches your Target Flash Version, go to

IF the Embedded Column does not match your Target Flash Version, go to

Requirements 

1. IP Address of CPU (Default Factory = 192.168.0.150 )

or you must know the current IP configured in the CPU

2. Provide 12 Vdc to CPU and target Daughter Boards

3. Must know the Target Flash Version (s28 ver. _____________)

4. Must know Target Board serial number and model (600/635)

5. Do not create duplicate serial numbers for Daughter Boards –

use the serial number (label) that is affixed to the board.

default factory IP = 192.168.0.150

PART 5 - FLASHING THE DAUGHTER BOARD

PART 4 - UPLOADING THE TARGET S28 FILE.

635/600 Daughter Board Flashing QRS

P a g e 1 of 2