Autonics LE7M-2 Podręcznik - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik dla Timer Autonics LE7M-2. Autonics LE7M-2 13 stron. W72xh72mm lcd week/year digital timers
Również dla Autonics LE7M-2: Podręcznik (13 strony), Podręcznik (13 strony), Instrukcja obsługi produktu (5 strony)
Drukuj stronę
⑤ ON time setting (AM, PM)
SUN MON TUE WED THU FRI SAT
⑥ ON time setting (Hour, Minute)
SUN MON TUE WED THU FRI SAT
⑦ Pulse width setting
SUN MON TUE WED THU FRI SAT
⑧ Complete to set
SUN MON TUE WED THU FRI SAT
※It is able to set year of start/end date in yearly program
setting up to 2 years later from the present year.
Program Check, Modify And Delete
Weekly program check, modify and delete
RUN mode
Press
MODE
key
Press
CHECK
for 3sec.
key for 1sec.
Press
Program 1 weekly program
key for 3sec.
record No.1 [ r01 ]
setting check
CHECK
Press
Program 1 weekly program
key for 3sec.
record No.2 [ r02 ]
setting check
CHECK
Press
Program 2 weekly program
key for 3sec.
record No.1 [ r01 ]
setting check
CHECK
key is pressed, move the
flashing to hour position and
select PM by
or
key
when ON time is afternoon.
Press
or
key twice to
set 10 and press
key
SET
after check 00min.
Press
or
key 4 times
to select pulse width as 5s
and press
key.
SET
Press
key to set ad-
SET
ditional program.
SET
Program 1 weekly program
record No.1 [ r01 ] setting
modify and delete
SET
Program 1 weekly program
record No.2 [ r02 ] setting
modify and delete
SET
Program 2 weekly program
record No.1 [ r01 ] setting
modify and delete
Weekly/Yearly Timer
Yearly program check, modify and delete
RUN mode
Press
key
Press
MODE
CHECK
for 3sec.
key for 1sec.
Press
key for 3sec.
Program 1 Yearly program
record No.1 [ r01 ]
setting check
CHECK
Press
Program 1 Yearly program
key for 3sec.
record No.2 [ r02 ]
setting check
CHECK
Press
Program 2 Yearly program
key for 3sec.
record No.1 [ r01 ]
setting check
CHECK
※YEAR turns ON when check, modify or delete yearly
program.
● If any key is untouched for 60sec, it is returned to RUN
mode in weekly or yearly program check.
● In weekly or yearly program check, it controls output
according to program setting and output is OFF in
modify or delete mode.
● When
key is pressed in weekly or yearly program
MODE
record modify, delete stand by or delete mode, current
work is cancelled and it is returned to check mode.
● Weekly or yearly program record modify and delete
(1) Program record modify
① When press
key over 3sec. in program check, EDT
SET
flashes in second display part, press
② It returns to check mode when finish the modify same
as the above procedure.
(2) Program record delete
① When press
key over 3sec. in program check, EDT
SET
flashes in second display part, press
CLR flashes in second display part and press
② Press CLR key over 3sec. when
display part, it returns to program check.
SET
Program 1 Yearly program
record No.1 [ r01 ] setting
modify and delete
SET
Program 1 Yearly program
record No.2 [ r02 ] setting
modify and delete
SET
Program 2 Yearly program
record No.1 [ r01 ] setting
modify and delete
key.
SET
or
key until
key.
SET
turns ON in second
SET
K-89
(A)
Photoelectric
Sensors
(B)
Fiber
Optic
Sensors
(C)
Door/Area
Sensors
(D)
Proximity
Sensors
(E)
Pressure
Sensors
(F)
Rotary
Encoders
(G)
Connectors/
Sockets
(H)
Temperature
Controllers
(I)
SSRs / Power
Controllers
(J)
Counters
(K)
Timers
(L)
Panel
Meters
(M)
Tacho /
Speed / Pulse
Meters
(N)
Display
Units
(O)
Sensor
Controllers
(P)
Switching
Mode Power
Supplies
(Q)
Stepper Motors
& Drivers
& Controllers
(R)
Graphic/
Logic
Panels
(S)
Field
Network
Devices
(T)
Software