909 52299 Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Falownik 909 52299. 909 52299 20 stron. 3500w inverter generator with pure sine wave

Drukuj stronę

Inverter technology

This generator has been developed with inverter technology providing

regulated, clean and "pure" electricity for a continuous uninterrupted stable

power supply.

Inverter technology provides confidence as a power source for camping

applications, outdoor lights, sound systems, televisions, microwaves and

power tools.

APPLIANCE

Ideal for domestic

emergency power

Caravan

applications and camping

Air Conditioner

or caravaning where power

Caravan Fridge

may be required for higher

wattage appliances such as

Caravan

Hot Water Heater

caravan air conditioners.

Can also be used for large

Laptop Computer

electric motors, powertools

Television

such as drills, jigsaws and

grinders, appliances like

Toaster

toasters, microwave ovens

or TVs, heating/lighting

9" Angle Grinder

applications and small to

medium fridges.

Power Saw

NOTE: Maintain normal

Drill 3/8"

safety precautions with

appliances and accessories as

Globe

for use on normal reticulated

mains supply.

Hair Dryer

Operating Periods

Microwave

NOTE: This product is for

Kettle

domestic DIY use only.

Maximum daily operational

NOTE: These figures are indicative only. Ensure you

use should not exceed

check the total rating of the appliance to be used before

10 hours a day.

connecting to the generator.

It is not recommended to

For more details on what appliance/s can

continually use the generator

be run with this unit, refer to page 24

day after day.

e-mail: [email protected]

MODEL: №. INF3800A • 52299

3500W Digital Inverter with Pure Sine Wave

STARTING

WATTS

1500

2200-3200

100-200

800

1500-2000

250

200

800-1600

1200-1600

1500-2000

2800

500-700

2400

1100

2000

1000-1600

1600

1500+

2000

2000+

2200-2400

AFTER SALES SUPPORT

1800 909 909

(toll free)

3500W Digital Inverter with Pure Sine Wave

Assembly

This generator has been designed to be used as

a stand alone / compact generator or a larger

portable / wheeled type generator.

Compact Stand Alone Assembly

Assembly of the Feet

NOTE: These 4 feet (28) can be fitted even if the

generator will be fitted with the wheeled option.

WARNING: Ensure the engine is switched

off while undertaking this task.

This generator is supplied with 4 feet (28)

which require the following assembly on the

generator (within red markers) (Fig A):

1. Place the generator on a flat and level surface and

then raise one side of the generator by placing a

wooden block (or something similar) underneath

the frame (Fig B) so the generator is slightly raised

and allows you access to be able to add the

feet (28).

WARNING: Do not turn the generator upside

down or place the generator on its side. Ensure

the generator is stable and cannot topple.

2. Insert the supplied hex head screw through the

bottom of the foot so it comes out the opposite

side.

Insert the supplied 10mm tube spanner (30), into

the bottom of the foot to securely hold the hex

head screw in place, (Fig C) then place the foot

underneath the hole in the bottom frame and

push through to the upper side (Fig D).

AFTER SALES SUPPORT

1800 909 909

(toll free)

General Assembly

Threaded wheel

foot hole

e-mail: [email protected]

MODEL: №. INF3800A • 52299