dynarex 12005 Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt medyczny dynarex 12005. dynarex 12005 9 stron. Ltc 5 function ultra low bed

Drukuj stronę

• Read all instructions before assembling or using the bed.

• DO NOT exceed maximum weight limitation of the bed.

The maximum safe working load (SWL) of the bed is

400 lb. The suggested patient weight is 320 lb. but

varies based on the accessories on the bed.

• The beds are intended for users who fully understand

the content of this manual and is not intended for use

by children.

• DO NOT operate your bed until it is fully assembled and

checked. To avoid injury, DO NOT attempt to remove the

bed from the carton without assistance.

• DO NOT use accessories that are not designed or ap-

proved for use with the bed. Use only Dynarex approved

parts and accessories. DO NOT make modifications to the

bed without authorization from the manufacturer. Doing so

will void the warranty. Serious harm or death may result

from the use of improper parts or accessories.

• The bed is NOT a transport device. The wheels on the bed

are for positioning the bed only.

• Ensure that the casters of the bed are locked at all times

to prevent unintended bed movement. The bed should only

be unlocked when the bed is moved. If bed is left unlocked

unintended movement may occur which may cause dam-

age to the resident or property damage.

• Moving the bed while the caster locks are engaged may

damage the bed or the floor. Ensure all the casters are

unlocked prior to moving the bed.

• Never permit more than one person on the bed at one

time.

• Ensure that the individual is properly positioned. The

body weight must be evenly distributed over the sleeping

surface. No body part should protrude outside the sleep

surface. Caution should be used when transferring the

individual to and from the bed.

• ALWAYS keep hands and feet away from the bottom of

the bed and any moving parts to avoid injury. Due to the

low bed clearance, extreme caution should be used as

under bed space and/or moving parts can create crush or

pinch points.

• DO NOT operate the bed with any items under the bed.

• ONLY use appropriate mattresses and ALWAYS adjust

the mattress retainer system accordingly to ensure the

mattress is fixed in place. The mattress must fit the frame

properly to avoid any entrapment issues. The wrong

size mattress may cause serious harm or death.

For more information about entrapment, visit

https://www.fda.gov/media/71460/download.

WARNINGS

• Inspect the casters every six months to check for tightness

and wear.

• DO NOT, under any circumstances, cut or remove the

ground prong from any plug. Some devices are equipped

with three-prong (ground) plugs for protection against

possible shock hazards. Where a two-prong wall recep-

tacle is encountered, it is the personal responsibility and

obligation of the customer to contact a qualified electrician

to have the two-prong receptacle replaced with a properly

grounded three-prong wall receptacle in accordance with

the regional and national regulations. If you must use an

extension cable, use ONLY a three-wire extension cable

having the same or higher electrical rating as the device

being connected.

• Cables should be routed and secured properly to ensure

they are not damaged during normal operation. DO NOT

use if any cable is cut, frayed or loosely connected to

the device. Cables may be damaged by inappropriate

handling, e.g. by kinking, shearing or other mechanical

damages. The cables are only replaceable by authorized

Dynarex service personnel.

• When moving the bed ensure the power cord and pen-

dants are secured. Ensure that the casters do not roll over

the cables.

• DO NOT attempt to open the pre-sealed actuator or obtain

local service, for it will VOID the warranty and might result

in damage. Consult your dealer or manufacturer for further

information.

• This bed is not intended to be used in an oxygen rich

environment.

• DO NOT allow any part of the bed to become wet or sub-

merged in water.

• DO NOT use near fire or explosive gases.

• The hand pendant cord may be a source of entanglement.

Patients with decreased mental acuity should not have

access to the pendant as serious harm or death may

result. An optional staff control embedded into the foot-

board is available.

• For every 2 minutes of continuous use of the actuator, the

bed actuator must not be in use for 18 minutes.

• The use of the Trendelenburg and Reverse Trendelenburg

may have adverse medical effects. These functions should

be used under the supervision of medical personnel.

• To reduce the possibility of damage to walls or other prop-

erty, the ensure at least a 18" between the wall or other

objects and the headboard and footboard before engaging

the Trendelenburg / Reverse Trendelenburg positions.

Long-Term Care Bed • D500 • 5 Function Ultra Low Bed (Reorder No. 12005)

WARNINGS

• To engage the Trendelenburg or Reverse Trendelenburg

position, raise the bed to its highest position first before

making the adjustment to position. Ensure there are no

obstruction around the bed before adjusting the position.

WHEN USING RAILS OR ASSIST BARS:

• Before operating, ensure that the bed rails/bars are

assembled and installed correctly as instructed.

• DO NOT apply side pressure to the bed rails/bars as it can

deform or damage the bed and/or bed rails/bars. Serious

harm or death may result from improper use of the bed

rails/bars.

DECLARATION – ELECTROMAGNETIC EMISSIONS

The D500 Long-Term Care Bed is intended for use in the

electromagnetic environment in which radiated RF disturbanc-

es are controlled. The customer or the user of the D500

Long-Term Care Bed can help prevent electromagnetic interfer-

ence by maintaining a minimum distance between portable and

mobile RF communications equipment (transmitters) and the

D500 Long-Term Care Bed and according to the maximum

output power of the communications equipment. Please contact

Dynarex at [email protected] for more information

and manufacturer technical specifications.

Long-Term Care Bed • D500 • 5 Function Ultra Low Bed (Reorder No. 12005)

(Continued)

• DO NOT use the bed rails/bar as a push handle for moving

the bed. This could deform or break the bed rails.

• DO NOT use the bed rails/bar if proper installation cannot

be achieved. Contact your dealer or manufacturer.

• When lowering the bed below 12.5" ensure the bed rails/

bars are raised. Lowering the bed below 12.5" with the bed

rails/bars in a lowered position may damage the bed.

Special considerations should be given to proximity of D500

Long-Term Care Bed and patients who have a cardiac pace-

maker, implanted defibrillator, or other implanted metallic or

electronic device, because this may cause electrical interfer-

ence, or death. Contact Dynarex [email protected]

for manufacturer electromagnetic interference technical

specifications.

Interference to electronic equipment may occur

in the vicinity of devices marked with this symbol: